Green technologies for sustainable & innovation in materials :: selected, peer reviewed papers from the 8th international materials technology conference & exhibition (IMTCE 2012), July 9-12th, 2012, Petaling Jaya, Malaysia /
Volume is indexed by Thomson Reuters CPCI-S (WoS).This volume consists of 46 peer-reviewed papers ranging from fundamental academic research to applied technology research, which are grouped into 6 chapters: Nanomaterials and green technology; Polymer, composite and advanced materials; Metals and al...
Gespeichert in:
| Körperschaft: | |
|---|---|
| Weitere Verfasser: | , , , |
| Format: | Elektronisch Tagungsbericht E-Book |
| Sprache: | English |
| Veröffentlicht: |
Durnten-Zurich, Switzerland :
Trans Tech Publications Ltd,
[2013]
|
| Schriftenreihe: | Advanced materials research ;
v. 686. |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Zusammenfassung: | Volume is indexed by Thomson Reuters CPCI-S (WoS).This volume consists of 46 peer-reviewed papers ranging from fundamental academic research to applied technology research, which are grouped into 6 chapters: Nanomaterials and green technology; Polymer, composite and advanced materials; Metals and alloys; Corrosion and coating technology; Ceramic materials; Materials processing and technology. It provides incomparable coverage of the current state of the art. The Institute of Materials Malaysia has been organizing the biennial conference since 1990, and over 300 papers were presented at its 2012 incarnation. Of those, 46 were selected for publication in the proceedings. They cover nanomaterials and green technology; polymer, composite, and advanced materials; metals and alloys; corrosion and coating technology; ceramic materials; and material processing and technology. Among specific topics are the effect of milling time on the production of herbal nanopowders, flow behavior in the resin infusion of a glass-fiber-reinforced polymer wind turbine blade, mechanical properties of chitosan-modified montmorillinite-filled tapioca starch nanocomposite films, fabricating and characterizing ceramic membrane by a gel-cast technique for filtering water, and zero-valent iron supported by nano-clay as an efficient adsorbent material for arsenic. |
| Beschreibung: | 1 online resource (c, that is, 3 pages, 356 pages) : illustrations (some color). |
| Bibliographie: | Includes bibliographical references and indexes. |
| ISBN: | 9783038260394 3038260398 |
| ISSN: | 1662-8985 ; |
Internformat
MARC
| LEADER | 00000cam a2200000 a 4500 | ||
|---|---|---|---|
| 001 | ZDB-4-EBA-ocn861212755 | ||
| 003 | OCoLC | ||
| 005 | 20241004212047.0 | ||
| 006 | m o d | ||
| 007 | cr |n||||||||| | ||
| 008 | 131021t20132013sz a ob 101 0 eng d | ||
| 040 | |a YDXCP |b eng |e pn |c YDXCP |d N$T |d FTU |d E7B |d OCLCO |d OCLCF |d OCLCQ |d EBLCP |d OCLCQ |d DEBSZ |d OCLCO |d OCL |d OCLCO |d OCLCQ |d OCLCO |d AGLDB |d OCLCQ |d VTS |d STF |d M8D |d OCLCQ |d TTECH |d OCLCO |d OCLCQ |d OCLCO |d OCLCQ | ||
| 020 | |a 9783038260394 |q (electronic bk.) | ||
| 020 | |a 3038260398 |q (electronic bk.) | ||
| 020 | |z 9783037856581 |q (paperback) | ||
| 020 | |z 3037856580 |q (paperback) | ||
| 035 | |a (OCoLC)861212755 | ||
| 050 | 4 | |a TA401.3 |b .I5818 2012 | |
| 050 | 4 | |a TA170 |b .I58 2012 | |
| 072 | 7 | |a TEC |x 010000 |2 bisacsh | |
| 082 | 7 | |a 628 |2 23 | |
| 049 | |a MAIN | ||
| 111 | 2 | |a International Materials Technology Conference & Exhibition |n (8th : |d 2012 : |c Petaling Jaya, Malaysia) |0 http://id.loc.gov/authorities/names/no2014029058 | |
| 245 | 1 | 0 | |a Green technologies for sustainable & innovation in materials : |b selected, peer reviewed papers from the 8th international materials technology conference & exhibition (IMTCE 2012), July 9-12th, 2012, Petaling Jaya, Malaysia / |c edited by M.K. Harun, M.Z.A. Yahya, S. Abdullah and C.H. Chan. |
| 264 | 1 | |a Durnten-Zurich, Switzerland : |b Trans Tech Publications Ltd, |c [2013] | |
| 264 | 4 | |c ©2013 | |
| 300 | |a 1 online resource (c, that is, 3 pages, 356 pages) : |b illustrations (some color). | ||
| 336 | |a text |b txt |2 rdacontent | ||
| 337 | |a computer |b c |2 rdamedia | ||
| 338 | |a online resource |b cr |2 rdacarrier | ||
| 490 | 1 | |a Advanced materials research, |x 1662-8985 ; |v v. 686 | |
| 504 | |a Includes bibliographical references and indexes. | ||
| 505 | 0 | 0 | |g Chapter 1: |t Nanomaterials and Green Technology -- |t Production of Herbal Nanopowders: Effect of Milling Time / |r M.Z. Borhan, A. Norhidayah, R. Ahmad, M. Rusop and S. Abdullah -- |t Green Synthesis of 10 nm Gold Nanoparticles via Seeded-Growth Method and its Conjugation Properties on Lateral Flow Immunoassay / |r R.M. Siti, A.R. Khairunisak, A.A. Azlan and N. Rahmah -- |t Morphology and Dimensions Controlled of Titania Nanotubes in Mixed Organic-Inorganic Electrolyte / |r Y.C. Lim, Z. Zainal, M.Z. Hussein and W.T. Tan -- |t One-Dimensional TiO2 Nanothorn-Like Structures Assisted TiO2 Template for High Absorption Hydrophilic Self-Cleaning / |r M.F. Achoi, M.N. Asiah, N.A. Jani, M. Rusop and S. Abdullah -- |t The Structural Properties of Carbon Nanotubes Grown on Porous Silicon-Based Materials by Thermal Chemical Vapor Deposition Method / |r F.S. Husairi, S.A.M. Zobir, M. Rusop and S. Abdullah -- |t Synthesis of Nanoporous Carbonated Hydroxyapatite Using Non-Ionic Pluronics Surfactant / |r N.F. Mohammad, F.Y. Yeoh and R. Othman -- |t Effect of Sintering Temperature on the Mechanical Properties of Nanostructured Zirconia Fabricated via Colloidal Processing / |r N.F. Amat, A. Muchtar, N. Yahaya and M.J. Ghazali -- |t Effect of Electrolyte Volume Ratio on Electroluminescence of Porous Silicon Nanostructures (PSiNs) Intensity / |r M. Ain Zubaidah, N.A. Asli, M. Rusop Mahmood and S. Abdullah -- |t Anodisation Time-Related Nanocrystallite Size of Porous Silicon Template Studied by Raman Spectroscopy, Photoluminescence and Fourier Transforms Infrared Spectroscopy / |r N.A. Asli, M. Rusop and S. Abdullah -- |t Qualitative Analysis of the Effect of Polymer Solution and Suspension Properties on the Electrospinning of Nanocomposite Fibers / |r K. Araño, M.L. Dela Cruz, E.M. Dela Pena and L.J. Diaz -- |t Surface and Structural Properties of TiO2 Nanotubes Formation via Electrochemical Anodization / |r N.A. Jani, M.F. Achoi, M.M. Mahat, S. Abdullah, Z. Lockman and A.F. Mohd Noor. |
| 505 | 0 | 0 | |g Chapter 2: |t Polymer, Composite and Advanced Materials -- |t Transparent Ultraviolet Sensors Based on Magnetron Sputtered ZnO Thin Films / |r J.W. Hoon, K.Y. Chan, Z.N. Ng and T.Y. Tou -- |t Facile Synthesis of Polyaniline-Silver Composites through Interfacial Polymerization / |r A. Abdolahi, E. Hamzah, Z. Ibrahim and S. Hashim -- |t Activated Carbon Fiber Derived from Pyrolysis of Palm Fiber / |r T. Lee, A. Matsumoto, R. Othman and F.Y. Yeoh -- |t Analysis of Delaminated Composite Plates / |r A. Mahieddine and M. Ouali -- |t The Properties of Activated Carbon Fiber Derived from Direct Activation from Oil Palm Empty Fruit Bunch Fiber / |r C.H. Ooi, C.L. Ang and F.Y. Yeoh -- |t Flow Behavior in the Resin Infusion of Glass Fiber Reinforced Polymer Wind Turbine Blade / |r M.A. Mohd Azlan, M.R. Abdul Latif, M.Z. Abdullah, K.A. Zainal Abidin and A. Abdul Wahab -- |t Effect of Coupling Agent on Mechanical and Thermal Behaviour of Oil Palm/Jute Hybrid Composites / |r M. Jawaid, A. Hassan and H.P.S.A. Khalil -- |t Effects of Different Types of Crosslinking of Epoxidized Natural Rubber in Semi-Metallic Friction Materials on Friction Performance / |r A. Almaslow, C.T. Ratnam, M.J. Ghazali, R.J. Talib and C.H. Azhari -- |t Transport and Morphological Properties of Gel Polymer Electrolytes Containing Mg(CF3SO3)2 / |r N.H. Zainol, Z. Osman, L. Othman and K.B. Md. Isa -- |t Mechanical Properties of Chitosan Modified Montmorillonite Filled Tapioca Starch Nanocomposite Films / |r S.W. Abdul Ghani, A. Abu Bakar and S.A. Samsudin. |
| 505 | 0 | 0 | |g Chapter 3: |t Metals and Alloys -- |t Fabrication and Characterisation of Powder Metallurgy Fe-Cr Matrix Composites Reinforced with Al2O3 / |r S. Shamsuddin, S.B. Jamaludin, Z. Hussain and Z.A. Ahmad -- |t Effect of Sintering Conditions on Mechanical Properties and Microstructure of Titanium Alloy Produced by Metal Injection Moulding (MIM) / |r M.J. Bin Suleiman Ahmad, M.A. Bin Ahmad, R. Bin Ibrahim, M. Bin Mohamad, N.B. Abu Kasim, M.R. Bin Dato'Abdul Kadir, S. Bin Muhamad, Y. Itoh, K. Hanada and T. Shimizu -- |t High Temperature Creep Behavior of Austenitic Fe-Ni-Cr Alloy / |r E. Hamzah, M. Mudang, A. Khwang Jenq and M. Adil Khattak -- |t Effect of Ageing Treatment on the Microstructures of Ti-50.7at.%Ni Shape Memory Alloy / |r K. Hastuti, E. Hamzah and J. Hashim -- |t Effect of Annealing Treatment on the Wear Properties of Ni Rich NiTi Alloy Coatings / |r T. Abubakar, M. Rahman and J. Stokes -- |t Interfacial Morphology Studies of Sn-3.8Ag-0.7Cu Alloy on Different Substrates / |r Y.K. Tian and M.C. Wong -- |t The Elaboration of an Iron Aluminium Alloy and the Study of Impact of the Addition Element on its Physical and Mechanical Properties / |r N. Metidji, N.E. Bacha, D. Saidi and S. Boutarfaia. |
| 505 | 0 | 0 | |g Chapter 4: |t Corrosion and Coating Technology -- |t Effects of Cathodic Protection and Coating on the Corrosion Rate of Carbon Steel in Stagnant and Flowing Freshwater / |r A. Ahdash, E. Hamzah, A. Ourdjini and S.R. Shamsuri -- |t Study on Fly Ash Based Geopolymer for Coating Applications / |r M.M. Al Bakri Abdullah, L. Jamaludin, H. Kamarudin, M. Binhussain, C.M. Ruzaidi Ghazali and A.M. Izzat -- |t Corrosion Behavior of X52 Steel in High Pressure CO2 Environment / |r A.H. Mustafa, B. Ari-Wahjoedi and M.C. Ismail -- |t Effect of Nanoparticle Addition in Hybrid Sol-Gel Silane Coating on Corrosion Resistance of Low Carbon Steel / |r P. Balan, A. Ng, C. Beng Siang, R.K. Singh Raman and C. Eng Seng -- |t Corrosion Behaviour of Lead-Free and Sn-Pb Solders in 3.5wt% NaCl / |r A. Kamarul Asri and E. Hamzah -- |t The Influence of Anode Profiles for Three Dimensions Numerical Simulation of Reinforced Concrete Corrosion Using Boundary Element Method / |r M. Ihsan, S. Fonna, M. Ridha, S. Huzni and A.K. Ariffin -- |t The Influence of Inertia Weight on Particle Swarm Optimization in Boundary Element Inverse Analysis for Rebar Corrosion Detection / |r S. Fonna, M. Ridha, S. Huzni and A.K. Ariffin. |
| 505 | 0 | 0 | |g Chapter 5: |t Ceramic Materials -- |t Optimum Powder Loading of Feedstock Based on an Alumina-Zirconia Powder for Ceramic Injection Molding / |r S.M. Ani, A. Muchtar, N. Muhamad and J.A. Ghani -- |t Fabrication and Characterization of Ceramic Membrane by Gel Cast Technique for Water Filtration / |r N. Ahmad, N. Binti Mohd Zaidan and M. Mohd Bazin -- |t Physical Properties of the Amorphous Silica Encapsulated Fluorescence Dye / |r Z. Nor Dyana, A.R. Khairunisak and A.A. Azlan -- |t Sintering of HA/Zirconia Composite for Biomedical and Dental Applications: A Review / |r K.F. Lim, M. Andanastuti, R. Mustaffa and C.Y. Tan -- |t Nanoclay-Supported Zero-Valent Iron as an Efficient Adsorbent Material for Arsenic / |r M.L. Dela Cruz, K. Araño, E.M. Dela Pena and L.J. Diaz -- |t Study on Fabrication of Ceramic Membrane from Shirasu Balloon for Waste Water Filtration / |r N. Ahmad, N. Yuzo, H. Kamibayasi and M. Mohamed Bazin. |
| 505 | 0 | 0 | |g Chapter 6: |t Materials Processing and Technology -- |t Effect of Compaction Load and Heat Treatment in Manufacturing of HSS Cutting Inserts under Nitrogen-Based Atmosphere / |r R.J. Talib, A.A. Mahaidin, S.A. Manaf, M.F. Fazira and M.A. Selamat -- |t Prediction of Welding Parameters and Weld Bead Geometry for GMAW Process in Overhead T-Fillet Welding Position (4F) / |r M.Y. Yaakub, G. Tham, W.M.A. Wan Abd Rahim, M.A.R. Mohd Radzi and A. Mahmud -- |t XRD Studies on Residual Stress of the Diamond Films Grown Using Hot Filament Chemical Vapour Deposition Technique on Silicon Nitride and Tungsten Carbide Substrates / |r E. Hamzah, T.M. Yong and K.C.M. Fai -- |t Synthesis and Development of Polymers-Infiltrated Porous Iron for Temporary Medical Implants: A Preliminary Result / |r A.H. Yusop and H. Hermawan -- |t Preparation and Characterization of Amine-Functionalised SBA-15 / |r W.K. Cheah, W.L. Thung, R. Othman and F.Y. Yeoh. |
| 588 | 0 | |a Online resource; title from PDF title page (EBSCOhost eBook Collection, viewed November 18, 2013). | |
| 520 | |a Volume is indexed by Thomson Reuters CPCI-S (WoS).This volume consists of 46 peer-reviewed papers ranging from fundamental academic research to applied technology research, which are grouped into 6 chapters: Nanomaterials and green technology; Polymer, composite and advanced materials; Metals and alloys; Corrosion and coating technology; Ceramic materials; Materials processing and technology. It provides incomparable coverage of the current state of the art. The Institute of Materials Malaysia has been organizing the biennial conference since 1990, and over 300 papers were presented at its 2012 incarnation. Of those, 46 were selected for publication in the proceedings. They cover nanomaterials and green technology; polymer, composite, and advanced materials; metals and alloys; corrosion and coating technology; ceramic materials; and material processing and technology. Among specific topics are the effect of milling time on the production of herbal nanopowders, flow behavior in the resin infusion of a glass-fiber-reinforced polymer wind turbine blade, mechanical properties of chitosan-modified montmorillinite-filled tapioca starch nanocomposite films, fabricating and characterizing ceramic membrane by a gel-cast technique for filtering water, and zero-valent iron supported by nano-clay as an efficient adsorbent material for arsenic. | ||
| 650 | 0 | |a Materials |v Congresses. | |
| 650 | 0 | |a Green technology |v Congresses. | |
| 650 | 6 | |a Technologie de protection de l'environnement |v Congrès. | |
| 650 | 6 | |a Matériaux |v Congrès. | |
| 650 | 7 | |a TECHNOLOGY & ENGINEERING |x Environmental |x General. |2 bisacsh | |
| 650 | 7 | |a Green technology |2 fast | |
| 650 | 7 | |a Materials |2 fast | |
| 655 | 7 | |a Conference papers and proceedings |2 fast | |
| 700 | 1 | |a Harun, M. K., |e editor |4 edc | |
| 700 | 1 | |a Yahya, M. Z. A., |e editor |4 edc | |
| 700 | 1 | |a Abdullah, S., |e editor |4 edc | |
| 700 | 1 | |a Chan, C. H., |e editor |4 edc | |
| 776 | 0 | 8 | |i Print version: |a International Materials Technology Conference & Exhibition (8th : 2012 : Petaling Jaya, Malaysia). |t Green technologies for sustainable & innovation in materials. |d Durnten-Zurich, Switzerland : Trans Tech Publications Ltd, [2013] |z 3037856580 |z 9783037856581 |w (OCoLC)854616254 |
| 830 | 0 | |a Advanced materials research ; |v v. 686. |x 1022-6680 |0 http://id.loc.gov/authorities/names/n99255722 | |
| 856 | 4 | 0 | |l FWS01 |p ZDB-4-EBA |q FWS_PDA_EBA |u https://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=646095 |3 Volltext |
| 938 | |a Trans Tech Publications, Ltd |b TRAN |n 10.4028/www.scientific.net/AMR.686 | ||
| 938 | |a ProQuest Ebook Central |b EBLB |n EBL1903346 | ||
| 938 | |a ebrary |b EBRY |n ebr10776578 | ||
| 938 | |a EBSCOhost |b EBSC |n 646095 | ||
| 938 | |a YBP Library Services |b YANK |n 11239304 | ||
| 994 | |a 92 |b GEBAY | ||
| 912 | |a ZDB-4-EBA | ||
| 049 | |a DE-863 | ||
Datensatz im Suchindex
| DE-BY-FWS_katkey | ZDB-4-EBA-ocn861212755 |
|---|---|
| _version_ | 1816882248108998656 |
| adam_text | |
| any_adam_object | |
| author2 | Harun, M. K. Yahya, M. Z. A. Abdullah, S. Chan, C. H. |
| author2_role | edt edt edt edt |
| author2_variant | m k h mk mkh m z a y mza mzay s a sa c h c ch chc |
| author_additional | M.Z. Borhan, A. Norhidayah, R. Ahmad, M. Rusop and S. Abdullah -- R.M. Siti, A.R. Khairunisak, A.A. Azlan and N. Rahmah -- Y.C. Lim, Z. Zainal, M.Z. Hussein and W.T. Tan -- M.F. Achoi, M.N. Asiah, N.A. Jani, M. Rusop and S. Abdullah -- F.S. Husairi, S.A.M. Zobir, M. Rusop and S. Abdullah -- N.F. Mohammad, F.Y. Yeoh and R. Othman -- N.F. Amat, A. Muchtar, N. Yahaya and M.J. Ghazali -- M. Ain Zubaidah, N.A. Asli, M. Rusop Mahmood and S. Abdullah -- N.A. Asli, M. Rusop and S. Abdullah -- K. Araño, M.L. Dela Cruz, E.M. Dela Pena and L.J. Diaz -- N.A. Jani, M.F. Achoi, M.M. Mahat, S. Abdullah, Z. Lockman and A.F. Mohd Noor. J.W. Hoon, K.Y. Chan, Z.N. Ng and T.Y. Tou -- A. Abdolahi, E. Hamzah, Z. Ibrahim and S. Hashim -- T. Lee, A. Matsumoto, R. Othman and F.Y. Yeoh -- A. Mahieddine and M. Ouali -- C.H. Ooi, C.L. Ang and F.Y. Yeoh -- M.A. Mohd Azlan, M.R. Abdul Latif, M.Z. Abdullah, K.A. Zainal Abidin and A. Abdul Wahab -- M. Jawaid, A. Hassan and H.P.S.A. Khalil -- A. Almaslow, C.T. Ratnam, M.J. Ghazali, R.J. Talib and C.H. Azhari -- N.H. Zainol, Z. Osman, L. Othman and K.B. Md. Isa -- S.W. Abdul Ghani, A. Abu Bakar and S.A. Samsudin. S. Shamsuddin, S.B. Jamaludin, Z. Hussain and Z.A. Ahmad -- M.J. Bin Suleiman Ahmad, M.A. Bin Ahmad, R. Bin Ibrahim, M. Bin Mohamad, N.B. Abu Kasim, M.R. Bin Dato'Abdul Kadir, S. Bin Muhamad, Y. Itoh, K. Hanada and T. Shimizu -- E. Hamzah, M. Mudang, A. Khwang Jenq and M. Adil Khattak -- K. Hastuti, E. Hamzah and J. Hashim -- T. Abubakar, M. Rahman and J. Stokes -- Y.K. Tian and M.C. Wong -- N. Metidji, N.E. Bacha, D. Saidi and S. Boutarfaia. A. Ahdash, E. Hamzah, A. Ourdjini and S.R. Shamsuri -- M.M. Al Bakri Abdullah, L. Jamaludin, H. Kamarudin, M. Binhussain, C.M. Ruzaidi Ghazali and A.M. Izzat -- A.H. Mustafa, B. Ari-Wahjoedi and M.C. Ismail -- P. Balan, A. Ng, C. Beng Siang, R.K. Singh Raman and C. Eng Seng -- A. Kamarul Asri and E. Hamzah -- M. Ihsan, S. Fonna, M. Ridha, S. Huzni and A.K. Ariffin -- S. Fonna, M. Ridha, S. Huzni and A.K. Ariffin. S.M. Ani, A. Muchtar, N. Muhamad and J.A. Ghani -- N. Ahmad, N. Binti Mohd Zaidan and M. Mohd Bazin -- Z. Nor Dyana, A.R. Khairunisak and A.A. Azlan -- K.F. Lim, M. Andanastuti, R. Mustaffa and C.Y. Tan -- M.L. Dela Cruz, K. Araño, E.M. Dela Pena and L.J. Diaz -- N. Ahmad, N. Yuzo, H. Kamibayasi and M. Mohamed Bazin. R.J. Talib, A.A. Mahaidin, S.A. Manaf, M.F. Fazira and M.A. Selamat -- M.Y. Yaakub, G. Tham, W.M.A. Wan Abd Rahim, M.A.R. Mohd Radzi and A. Mahmud -- E. Hamzah, T.M. Yong and K.C.M. Fai -- A.H. Yusop and H. Hermawan -- W.K. Cheah, W.L. Thung, R. Othman and F.Y. Yeoh. |
| author_corporate | International Materials Technology Conference & Exhibition Petaling Jaya, Malaysia |
| author_corporate_role | |
| author_facet | Harun, M. K. Yahya, M. Z. A. Abdullah, S. Chan, C. H. International Materials Technology Conference & Exhibition Petaling Jaya, Malaysia |
| author_sort | International Materials Technology Conference & Exhibition Petaling Jaya, Malaysia |
| building | Verbundindex |
| bvnumber | localFWS |
| callnumber-first | T - Technology |
| callnumber-label | TA401 |
| callnumber-raw | TA401.3 .I5818 2012 TA170 .I58 2012 |
| callnumber-search | TA401.3 .I5818 2012 TA170 .I58 2012 |
| callnumber-sort | TA 3401.3 I5818 42012 |
| callnumber-subject | TA - General and Civil Engineering |
| collection | ZDB-4-EBA |
| contents | Nanomaterials and Green Technology -- Production of Herbal Nanopowders: Effect of Milling Time / Green Synthesis of 10 nm Gold Nanoparticles via Seeded-Growth Method and its Conjugation Properties on Lateral Flow Immunoassay / Morphology and Dimensions Controlled of Titania Nanotubes in Mixed Organic-Inorganic Electrolyte / One-Dimensional TiO2 Nanothorn-Like Structures Assisted TiO2 Template for High Absorption Hydrophilic Self-Cleaning / The Structural Properties of Carbon Nanotubes Grown on Porous Silicon-Based Materials by Thermal Chemical Vapor Deposition Method / Synthesis of Nanoporous Carbonated Hydroxyapatite Using Non-Ionic Pluronics Surfactant / Effect of Sintering Temperature on the Mechanical Properties of Nanostructured Zirconia Fabricated via Colloidal Processing / Effect of Electrolyte Volume Ratio on Electroluminescence of Porous Silicon Nanostructures (PSiNs) Intensity / Anodisation Time-Related Nanocrystallite Size of Porous Silicon Template Studied by Raman Spectroscopy, Photoluminescence and Fourier Transforms Infrared Spectroscopy / Qualitative Analysis of the Effect of Polymer Solution and Suspension Properties on the Electrospinning of Nanocomposite Fibers / Surface and Structural Properties of TiO2 Nanotubes Formation via Electrochemical Anodization / Polymer, Composite and Advanced Materials -- Transparent Ultraviolet Sensors Based on Magnetron Sputtered ZnO Thin Films / Facile Synthesis of Polyaniline-Silver Composites through Interfacial Polymerization / Activated Carbon Fiber Derived from Pyrolysis of Palm Fiber / Analysis of Delaminated Composite Plates / The Properties of Activated Carbon Fiber Derived from Direct Activation from Oil Palm Empty Fruit Bunch Fiber / Flow Behavior in the Resin Infusion of Glass Fiber Reinforced Polymer Wind Turbine Blade / Effect of Coupling Agent on Mechanical and Thermal Behaviour of Oil Palm/Jute Hybrid Composites / Effects of Different Types of Crosslinking of Epoxidized Natural Rubber in Semi-Metallic Friction Materials on Friction Performance / Transport and Morphological Properties of Gel Polymer Electrolytes Containing Mg(CF3SO3)2 / Mechanical Properties of Chitosan Modified Montmorillonite Filled Tapioca Starch Nanocomposite Films / Metals and Alloys -- Fabrication and Characterisation of Powder Metallurgy Fe-Cr Matrix Composites Reinforced with Al2O3 / Effect of Sintering Conditions on Mechanical Properties and Microstructure of Titanium Alloy Produced by Metal Injection Moulding (MIM) / High Temperature Creep Behavior of Austenitic Fe-Ni-Cr Alloy / Effect of Ageing Treatment on the Microstructures of Ti-50.7at.%Ni Shape Memory Alloy / Effect of Annealing Treatment on the Wear Properties of Ni Rich NiTi Alloy Coatings / Interfacial Morphology Studies of Sn-3.8Ag-0.7Cu Alloy on Different Substrates / The Elaboration of an Iron Aluminium Alloy and the Study of Impact of the Addition Element on its Physical and Mechanical Properties / Corrosion and Coating Technology -- Effects of Cathodic Protection and Coating on the Corrosion Rate of Carbon Steel in Stagnant and Flowing Freshwater / Study on Fly Ash Based Geopolymer for Coating Applications / Corrosion Behavior of X52 Steel in High Pressure CO2 Environment / Effect of Nanoparticle Addition in Hybrid Sol-Gel Silane Coating on Corrosion Resistance of Low Carbon Steel / Corrosion Behaviour of Lead-Free and Sn-Pb Solders in 3.5wt% NaCl / The Influence of Anode Profiles for Three Dimensions Numerical Simulation of Reinforced Concrete Corrosion Using Boundary Element Method / The Influence of Inertia Weight on Particle Swarm Optimization in Boundary Element Inverse Analysis for Rebar Corrosion Detection / Ceramic Materials -- Optimum Powder Loading of Feedstock Based on an Alumina-Zirconia Powder for Ceramic Injection Molding / Fabrication and Characterization of Ceramic Membrane by Gel Cast Technique for Water Filtration / Physical Properties of the Amorphous Silica Encapsulated Fluorescence Dye / Sintering of HA/Zirconia Composite for Biomedical and Dental Applications: A Review / Nanoclay-Supported Zero-Valent Iron as an Efficient Adsorbent Material for Arsenic / Study on Fabrication of Ceramic Membrane from Shirasu Balloon for Waste Water Filtration / Materials Processing and Technology -- Effect of Compaction Load and Heat Treatment in Manufacturing of HSS Cutting Inserts under Nitrogen-Based Atmosphere / Prediction of Welding Parameters and Weld Bead Geometry for GMAW Process in Overhead T-Fillet Welding Position (4F) / XRD Studies on Residual Stress of the Diamond Films Grown Using Hot Filament Chemical Vapour Deposition Technique on Silicon Nitride and Tungsten Carbide Substrates / Synthesis and Development of Polymers-Infiltrated Porous Iron for Temporary Medical Implants: A Preliminary Result / Preparation and Characterization of Amine-Functionalised SBA-15 / |
| ctrlnum | (OCoLC)861212755 |
| dewey-full | 628 |
| dewey-hundreds | 600 - Technology (Applied sciences) |
| dewey-ones | 628 - Sanitary engineering |
| dewey-raw | 628 |
| dewey-search | 628 |
| dewey-sort | 3628 |
| dewey-tens | 620 - Engineering and allied operations |
| discipline | Bauingenieurwesen |
| format | Electronic Conference Proceeding eBook |
| fullrecord | <?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>12321cam a2200697 a 4500</leader><controlfield tag="001">ZDB-4-EBA-ocn861212755</controlfield><controlfield tag="003">OCoLC</controlfield><controlfield tag="005">20241004212047.0</controlfield><controlfield tag="006">m o d </controlfield><controlfield tag="007">cr |n|||||||||</controlfield><controlfield tag="008">131021t20132013sz a ob 101 0 eng d</controlfield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">YDXCP</subfield><subfield code="b">eng</subfield><subfield code="e">pn</subfield><subfield code="c">YDXCP</subfield><subfield code="d">N$T</subfield><subfield code="d">FTU</subfield><subfield code="d">E7B</subfield><subfield code="d">OCLCO</subfield><subfield code="d">OCLCF</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">EBLCP</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">DEBSZ</subfield><subfield code="d">OCLCO</subfield><subfield code="d">OCL</subfield><subfield code="d">OCLCO</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">OCLCO</subfield><subfield code="d">AGLDB</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">VTS</subfield><subfield code="d">STF</subfield><subfield code="d">M8D</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">TTECH</subfield><subfield code="d">OCLCO</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">OCLCO</subfield><subfield code="d">OCLCQ</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9783038260394</subfield><subfield code="q">(electronic bk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">3038260398</subfield><subfield code="q">(electronic bk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="z">9783037856581</subfield><subfield code="q">(paperback)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="z">3037856580</subfield><subfield code="q">(paperback)</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(OCoLC)861212755</subfield></datafield><datafield tag="050" ind1=" " ind2="4"><subfield code="a">TA401.3</subfield><subfield code="b">.I5818 2012</subfield></datafield><datafield tag="050" ind1=" " ind2="4"><subfield code="a">TA170</subfield><subfield code="b">.I58 2012</subfield></datafield><datafield tag="072" ind1=" " ind2="7"><subfield code="a">TEC</subfield><subfield code="x">010000</subfield><subfield code="2">bisacsh</subfield></datafield><datafield tag="082" ind1="7" ind2=" "><subfield code="a">628</subfield><subfield code="2">23</subfield></datafield><datafield tag="049" ind1=" " ind2=" "><subfield code="a">MAIN</subfield></datafield><datafield tag="111" ind1="2" ind2=" "><subfield code="a">International Materials Technology Conference & Exhibition</subfield><subfield code="n">(8th :</subfield><subfield code="d">2012 :</subfield><subfield code="c">Petaling Jaya, Malaysia)</subfield><subfield code="0">http://id.loc.gov/authorities/names/no2014029058</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Green technologies for sustainable & innovation in materials :</subfield><subfield code="b">selected, peer reviewed papers from the 8th international materials technology conference & exhibition (IMTCE 2012), July 9-12th, 2012, Petaling Jaya, Malaysia /</subfield><subfield code="c">edited by M.K. Harun, M.Z.A. Yahya, S. Abdullah and C.H. Chan.</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="a">Durnten-Zurich, Switzerland :</subfield><subfield code="b">Trans Tech Publications Ltd,</subfield><subfield code="c">[2013]</subfield></datafield><datafield tag="264" ind1=" " ind2="4"><subfield code="c">©2013</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">1 online resource (c, that is, 3 pages, 356 pages) :</subfield><subfield code="b">illustrations (some color).</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">computer</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">online resource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="490" ind1="1" ind2=" "><subfield code="a">Advanced materials research,</subfield><subfield code="x">1662-8985 ;</subfield><subfield code="v">v. 686</subfield></datafield><datafield tag="504" ind1=" " ind2=" "><subfield code="a">Includes bibliographical references and indexes.</subfield></datafield><datafield tag="505" ind1="0" ind2="0"><subfield code="g">Chapter 1:</subfield><subfield code="t">Nanomaterials and Green Technology --</subfield><subfield code="t">Production of Herbal Nanopowders: Effect of Milling Time /</subfield><subfield code="r">M.Z. Borhan, A. Norhidayah, R. Ahmad, M. Rusop and S. Abdullah --</subfield><subfield code="t">Green Synthesis of 10 nm Gold Nanoparticles via Seeded-Growth Method and its Conjugation Properties on Lateral Flow Immunoassay /</subfield><subfield code="r">R.M. Siti, A.R. Khairunisak, A.A. Azlan and N. Rahmah --</subfield><subfield code="t">Morphology and Dimensions Controlled of Titania Nanotubes in Mixed Organic-Inorganic Electrolyte /</subfield><subfield code="r">Y.C. Lim, Z. Zainal, M.Z. Hussein and W.T. Tan --</subfield><subfield code="t">One-Dimensional TiO2 Nanothorn-Like Structures Assisted TiO2 Template for High Absorption Hydrophilic Self-Cleaning /</subfield><subfield code="r">M.F. Achoi, M.N. Asiah, N.A. Jani, M. Rusop and S. Abdullah --</subfield><subfield code="t">The Structural Properties of Carbon Nanotubes Grown on Porous Silicon-Based Materials by Thermal Chemical Vapor Deposition Method /</subfield><subfield code="r">F.S. Husairi, S.A.M. Zobir, M. Rusop and S. Abdullah --</subfield><subfield code="t">Synthesis of Nanoporous Carbonated Hydroxyapatite Using Non-Ionic Pluronics Surfactant /</subfield><subfield code="r">N.F. Mohammad, F.Y. Yeoh and R. Othman --</subfield><subfield code="t">Effect of Sintering Temperature on the Mechanical Properties of Nanostructured Zirconia Fabricated via Colloidal Processing /</subfield><subfield code="r">N.F. Amat, A. Muchtar, N. Yahaya and M.J. Ghazali --</subfield><subfield code="t">Effect of Electrolyte Volume Ratio on Electroluminescence of Porous Silicon Nanostructures (PSiNs) Intensity /</subfield><subfield code="r">M. Ain Zubaidah, N.A. Asli, M. Rusop Mahmood and S. Abdullah --</subfield><subfield code="t">Anodisation Time-Related Nanocrystallite Size of Porous Silicon Template Studied by Raman Spectroscopy, Photoluminescence and Fourier Transforms Infrared Spectroscopy /</subfield><subfield code="r">N.A. Asli, M. Rusop and S. Abdullah --</subfield><subfield code="t">Qualitative Analysis of the Effect of Polymer Solution and Suspension Properties on the Electrospinning of Nanocomposite Fibers /</subfield><subfield code="r">K. Araño, M.L. Dela Cruz, E.M. Dela Pena and L.J. Diaz --</subfield><subfield code="t">Surface and Structural Properties of TiO2 Nanotubes Formation via Electrochemical Anodization /</subfield><subfield code="r">N.A. Jani, M.F. Achoi, M.M. Mahat, S. Abdullah, Z. Lockman and A.F. Mohd Noor.</subfield></datafield><datafield tag="505" ind1="0" ind2="0"><subfield code="g">Chapter 2:</subfield><subfield code="t">Polymer, Composite and Advanced Materials --</subfield><subfield code="t">Transparent Ultraviolet Sensors Based on Magnetron Sputtered ZnO Thin Films /</subfield><subfield code="r">J.W. Hoon, K.Y. Chan, Z.N. Ng and T.Y. Tou --</subfield><subfield code="t">Facile Synthesis of Polyaniline-Silver Composites through Interfacial Polymerization /</subfield><subfield code="r">A. Abdolahi, E. Hamzah, Z. Ibrahim and S. Hashim --</subfield><subfield code="t">Activated Carbon Fiber Derived from Pyrolysis of Palm Fiber /</subfield><subfield code="r">T. Lee, A. Matsumoto, R. Othman and F.Y. Yeoh --</subfield><subfield code="t">Analysis of Delaminated Composite Plates /</subfield><subfield code="r">A. Mahieddine and M. Ouali --</subfield><subfield code="t">The Properties of Activated Carbon Fiber Derived from Direct Activation from Oil Palm Empty Fruit Bunch Fiber /</subfield><subfield code="r">C.H. Ooi, C.L. Ang and F.Y. Yeoh --</subfield><subfield code="t">Flow Behavior in the Resin Infusion of Glass Fiber Reinforced Polymer Wind Turbine Blade /</subfield><subfield code="r">M.A. Mohd Azlan, M.R. Abdul Latif, M.Z. Abdullah, K.A. Zainal Abidin and A. Abdul Wahab --</subfield><subfield code="t">Effect of Coupling Agent on Mechanical and Thermal Behaviour of Oil Palm/Jute Hybrid Composites /</subfield><subfield code="r">M. Jawaid, A. Hassan and H.P.S.A. Khalil --</subfield><subfield code="t">Effects of Different Types of Crosslinking of Epoxidized Natural Rubber in Semi-Metallic Friction Materials on Friction Performance /</subfield><subfield code="r">A. Almaslow, C.T. Ratnam, M.J. Ghazali, R.J. Talib and C.H. Azhari --</subfield><subfield code="t">Transport and Morphological Properties of Gel Polymer Electrolytes Containing Mg(CF3SO3)2 /</subfield><subfield code="r">N.H. Zainol, Z. Osman, L. Othman and K.B. Md. Isa --</subfield><subfield code="t">Mechanical Properties of Chitosan Modified Montmorillonite Filled Tapioca Starch Nanocomposite Films /</subfield><subfield code="r">S.W. Abdul Ghani, A. Abu Bakar and S.A. Samsudin.</subfield></datafield><datafield tag="505" ind1="0" ind2="0"><subfield code="g">Chapter 3:</subfield><subfield code="t">Metals and Alloys --</subfield><subfield code="t">Fabrication and Characterisation of Powder Metallurgy Fe-Cr Matrix Composites Reinforced with Al2O3 /</subfield><subfield code="r">S. Shamsuddin, S.B. Jamaludin, Z. Hussain and Z.A. Ahmad --</subfield><subfield code="t">Effect of Sintering Conditions on Mechanical Properties and Microstructure of Titanium Alloy Produced by Metal Injection Moulding (MIM) /</subfield><subfield code="r">M.J. Bin Suleiman Ahmad, M.A. Bin Ahmad, R. Bin Ibrahim, M. Bin Mohamad, N.B. Abu Kasim, M.R. Bin Dato'Abdul Kadir, S. Bin Muhamad, Y. Itoh, K. Hanada and T. Shimizu --</subfield><subfield code="t">High Temperature Creep Behavior of Austenitic Fe-Ni-Cr Alloy /</subfield><subfield code="r">E. Hamzah, M. Mudang, A. Khwang Jenq and M. Adil Khattak --</subfield><subfield code="t">Effect of Ageing Treatment on the Microstructures of Ti-50.7at.%Ni Shape Memory Alloy /</subfield><subfield code="r">K. Hastuti, E. Hamzah and J. Hashim --</subfield><subfield code="t">Effect of Annealing Treatment on the Wear Properties of Ni Rich NiTi Alloy Coatings /</subfield><subfield code="r">T. Abubakar, M. Rahman and J. Stokes --</subfield><subfield code="t">Interfacial Morphology Studies of Sn-3.8Ag-0.7Cu Alloy on Different Substrates /</subfield><subfield code="r">Y.K. Tian and M.C. Wong --</subfield><subfield code="t">The Elaboration of an Iron Aluminium Alloy and the Study of Impact of the Addition Element on its Physical and Mechanical Properties /</subfield><subfield code="r">N. Metidji, N.E. Bacha, D. Saidi and S. Boutarfaia.</subfield></datafield><datafield tag="505" ind1="0" ind2="0"><subfield code="g">Chapter 4:</subfield><subfield code="t">Corrosion and Coating Technology --</subfield><subfield code="t">Effects of Cathodic Protection and Coating on the Corrosion Rate of Carbon Steel in Stagnant and Flowing Freshwater /</subfield><subfield code="r">A. Ahdash, E. Hamzah, A. Ourdjini and S.R. Shamsuri --</subfield><subfield code="t">Study on Fly Ash Based Geopolymer for Coating Applications /</subfield><subfield code="r">M.M. Al Bakri Abdullah, L. Jamaludin, H. Kamarudin, M. Binhussain, C.M. Ruzaidi Ghazali and A.M. Izzat --</subfield><subfield code="t">Corrosion Behavior of X52 Steel in High Pressure CO2 Environment /</subfield><subfield code="r">A.H. Mustafa, B. Ari-Wahjoedi and M.C. Ismail --</subfield><subfield code="t">Effect of Nanoparticle Addition in Hybrid Sol-Gel Silane Coating on Corrosion Resistance of Low Carbon Steel /</subfield><subfield code="r">P. Balan, A. Ng, C. Beng Siang, R.K. Singh Raman and C. Eng Seng --</subfield><subfield code="t">Corrosion Behaviour of Lead-Free and Sn-Pb Solders in 3.5wt% NaCl /</subfield><subfield code="r">A. Kamarul Asri and E. Hamzah --</subfield><subfield code="t">The Influence of Anode Profiles for Three Dimensions Numerical Simulation of Reinforced Concrete Corrosion Using Boundary Element Method /</subfield><subfield code="r">M. Ihsan, S. Fonna, M. Ridha, S. Huzni and A.K. Ariffin --</subfield><subfield code="t">The Influence of Inertia Weight on Particle Swarm Optimization in Boundary Element Inverse Analysis for Rebar Corrosion Detection /</subfield><subfield code="r">S. Fonna, M. Ridha, S. Huzni and A.K. Ariffin.</subfield></datafield><datafield tag="505" ind1="0" ind2="0"><subfield code="g">Chapter 5:</subfield><subfield code="t">Ceramic Materials --</subfield><subfield code="t">Optimum Powder Loading of Feedstock Based on an Alumina-Zirconia Powder for Ceramic Injection Molding /</subfield><subfield code="r">S.M. Ani, A. Muchtar, N. Muhamad and J.A. Ghani --</subfield><subfield code="t">Fabrication and Characterization of Ceramic Membrane by Gel Cast Technique for Water Filtration /</subfield><subfield code="r">N. Ahmad, N. Binti Mohd Zaidan and M. Mohd Bazin --</subfield><subfield code="t">Physical Properties of the Amorphous Silica Encapsulated Fluorescence Dye /</subfield><subfield code="r">Z. Nor Dyana, A.R. Khairunisak and A.A. Azlan --</subfield><subfield code="t">Sintering of HA/Zirconia Composite for Biomedical and Dental Applications: A Review /</subfield><subfield code="r">K.F. Lim, M. Andanastuti, R. Mustaffa and C.Y. Tan --</subfield><subfield code="t">Nanoclay-Supported Zero-Valent Iron as an Efficient Adsorbent Material for Arsenic /</subfield><subfield code="r">M.L. Dela Cruz, K. Araño, E.M. Dela Pena and L.J. Diaz --</subfield><subfield code="t">Study on Fabrication of Ceramic Membrane from Shirasu Balloon for Waste Water Filtration /</subfield><subfield code="r">N. Ahmad, N. Yuzo, H. Kamibayasi and M. Mohamed Bazin.</subfield></datafield><datafield tag="505" ind1="0" ind2="0"><subfield code="g">Chapter 6:</subfield><subfield code="t">Materials Processing and Technology --</subfield><subfield code="t">Effect of Compaction Load and Heat Treatment in Manufacturing of HSS Cutting Inserts under Nitrogen-Based Atmosphere /</subfield><subfield code="r">R.J. Talib, A.A. Mahaidin, S.A. Manaf, M.F. Fazira and M.A. Selamat --</subfield><subfield code="t">Prediction of Welding Parameters and Weld Bead Geometry for GMAW Process in Overhead T-Fillet Welding Position (4F) /</subfield><subfield code="r">M.Y. Yaakub, G. Tham, W.M.A. Wan Abd Rahim, M.A.R. Mohd Radzi and A. Mahmud --</subfield><subfield code="t">XRD Studies on Residual Stress of the Diamond Films Grown Using Hot Filament Chemical Vapour Deposition Technique on Silicon Nitride and Tungsten Carbide Substrates /</subfield><subfield code="r">E. Hamzah, T.M. Yong and K.C.M. Fai --</subfield><subfield code="t">Synthesis and Development of Polymers-Infiltrated Porous Iron for Temporary Medical Implants: A Preliminary Result /</subfield><subfield code="r">A.H. Yusop and H. Hermawan --</subfield><subfield code="t">Preparation and Characterization of Amine-Functionalised SBA-15 /</subfield><subfield code="r">W.K. Cheah, W.L. Thung, R. Othman and F.Y. Yeoh.</subfield></datafield><datafield tag="588" ind1="0" ind2=" "><subfield code="a">Online resource; title from PDF title page (EBSCOhost eBook Collection, viewed November 18, 2013).</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Volume is indexed by Thomson Reuters CPCI-S (WoS).This volume consists of 46 peer-reviewed papers ranging from fundamental academic research to applied technology research, which are grouped into 6 chapters: Nanomaterials and green technology; Polymer, composite and advanced materials; Metals and alloys; Corrosion and coating technology; Ceramic materials; Materials processing and technology. It provides incomparable coverage of the current state of the art. The Institute of Materials Malaysia has been organizing the biennial conference since 1990, and over 300 papers were presented at its 2012 incarnation. Of those, 46 were selected for publication in the proceedings. They cover nanomaterials and green technology; polymer, composite, and advanced materials; metals and alloys; corrosion and coating technology; ceramic materials; and material processing and technology. Among specific topics are the effect of milling time on the production of herbal nanopowders, flow behavior in the resin infusion of a glass-fiber-reinforced polymer wind turbine blade, mechanical properties of chitosan-modified montmorillinite-filled tapioca starch nanocomposite films, fabricating and characterizing ceramic membrane by a gel-cast technique for filtering water, and zero-valent iron supported by nano-clay as an efficient adsorbent material for arsenic.</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Materials</subfield><subfield code="v">Congresses.</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Green technology</subfield><subfield code="v">Congresses.</subfield></datafield><datafield tag="650" ind1=" " ind2="6"><subfield code="a">Technologie de protection de l'environnement</subfield><subfield code="v">Congrès.</subfield></datafield><datafield tag="650" ind1=" " ind2="6"><subfield code="a">Matériaux</subfield><subfield code="v">Congrès.</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">TECHNOLOGY & ENGINEERING</subfield><subfield code="x">Environmental</subfield><subfield code="x">General.</subfield><subfield code="2">bisacsh</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Green technology</subfield><subfield code="2">fast</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Materials</subfield><subfield code="2">fast</subfield></datafield><datafield tag="655" ind1=" " ind2="7"><subfield code="a">Conference papers and proceedings</subfield><subfield code="2">fast</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Harun, M. K.,</subfield><subfield code="e">editor</subfield><subfield code="4">edc</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Yahya, M. Z. A.,</subfield><subfield code="e">editor</subfield><subfield code="4">edc</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Abdullah, S.,</subfield><subfield code="e">editor</subfield><subfield code="4">edc</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Chan, C. H.,</subfield><subfield code="e">editor</subfield><subfield code="4">edc</subfield></datafield><datafield tag="776" ind1="0" ind2="8"><subfield code="i">Print version:</subfield><subfield code="a">International Materials Technology Conference & Exhibition (8th : 2012 : Petaling Jaya, Malaysia).</subfield><subfield code="t">Green technologies for sustainable & innovation in materials.</subfield><subfield code="d">Durnten-Zurich, Switzerland : Trans Tech Publications Ltd, [2013]</subfield><subfield code="z">3037856580</subfield><subfield code="z">9783037856581</subfield><subfield code="w">(OCoLC)854616254</subfield></datafield><datafield tag="830" ind1=" " ind2="0"><subfield code="a">Advanced materials research ;</subfield><subfield code="v">v. 686.</subfield><subfield code="x">1022-6680</subfield><subfield code="0">http://id.loc.gov/authorities/names/n99255722</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="l">FWS01</subfield><subfield code="p">ZDB-4-EBA</subfield><subfield code="q">FWS_PDA_EBA</subfield><subfield code="u">https://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=646095</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">Trans Tech Publications, Ltd</subfield><subfield code="b">TRAN</subfield><subfield code="n">10.4028/www.scientific.net/AMR.686</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">ProQuest Ebook Central</subfield><subfield code="b">EBLB</subfield><subfield code="n">EBL1903346</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">ebrary</subfield><subfield code="b">EBRY</subfield><subfield code="n">ebr10776578</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">EBSCOhost</subfield><subfield code="b">EBSC</subfield><subfield code="n">646095</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">YBP Library Services</subfield><subfield code="b">YANK</subfield><subfield code="n">11239304</subfield></datafield><datafield tag="994" ind1=" " ind2=" "><subfield code="a">92</subfield><subfield code="b">GEBAY</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ZDB-4-EBA</subfield></datafield><datafield tag="049" ind1=" " ind2=" "><subfield code="a">DE-863</subfield></datafield></record></collection> |
| genre | Conference papers and proceedings fast |
| genre_facet | Conference papers and proceedings |
| id | ZDB-4-EBA-ocn861212755 |
| illustrated | Illustrated |
| indexdate | 2024-11-27T13:25:35Z |
| institution | BVB |
| institution_GND | http://id.loc.gov/authorities/names/no2014029058 |
| isbn | 9783038260394 3038260398 |
| issn | 1662-8985 ; |
| language | English |
| oclc_num | 861212755 |
| open_access_boolean | |
| owner | MAIN DE-863 DE-BY-FWS |
| owner_facet | MAIN DE-863 DE-BY-FWS |
| physical | 1 online resource (c, that is, 3 pages, 356 pages) : illustrations (some color). |
| psigel | ZDB-4-EBA |
| publishDate | 2013 |
| publishDateSearch | 2013 |
| publishDateSort | 2013 |
| publisher | Trans Tech Publications Ltd, |
| record_format | marc |
| series | Advanced materials research ; |
| series2 | Advanced materials research, |
| spelling | International Materials Technology Conference & Exhibition (8th : 2012 : Petaling Jaya, Malaysia) http://id.loc.gov/authorities/names/no2014029058 Green technologies for sustainable & innovation in materials : selected, peer reviewed papers from the 8th international materials technology conference & exhibition (IMTCE 2012), July 9-12th, 2012, Petaling Jaya, Malaysia / edited by M.K. Harun, M.Z.A. Yahya, S. Abdullah and C.H. Chan. Durnten-Zurich, Switzerland : Trans Tech Publications Ltd, [2013] ©2013 1 online resource (c, that is, 3 pages, 356 pages) : illustrations (some color). text txt rdacontent computer c rdamedia online resource cr rdacarrier Advanced materials research, 1662-8985 ; v. 686 Includes bibliographical references and indexes. Chapter 1: Nanomaterials and Green Technology -- Production of Herbal Nanopowders: Effect of Milling Time / M.Z. Borhan, A. Norhidayah, R. Ahmad, M. Rusop and S. Abdullah -- Green Synthesis of 10 nm Gold Nanoparticles via Seeded-Growth Method and its Conjugation Properties on Lateral Flow Immunoassay / R.M. Siti, A.R. Khairunisak, A.A. Azlan and N. Rahmah -- Morphology and Dimensions Controlled of Titania Nanotubes in Mixed Organic-Inorganic Electrolyte / Y.C. Lim, Z. Zainal, M.Z. Hussein and W.T. Tan -- One-Dimensional TiO2 Nanothorn-Like Structures Assisted TiO2 Template for High Absorption Hydrophilic Self-Cleaning / M.F. Achoi, M.N. Asiah, N.A. Jani, M. Rusop and S. Abdullah -- The Structural Properties of Carbon Nanotubes Grown on Porous Silicon-Based Materials by Thermal Chemical Vapor Deposition Method / F.S. Husairi, S.A.M. Zobir, M. Rusop and S. Abdullah -- Synthesis of Nanoporous Carbonated Hydroxyapatite Using Non-Ionic Pluronics Surfactant / N.F. Mohammad, F.Y. Yeoh and R. Othman -- Effect of Sintering Temperature on the Mechanical Properties of Nanostructured Zirconia Fabricated via Colloidal Processing / N.F. Amat, A. Muchtar, N. Yahaya and M.J. Ghazali -- Effect of Electrolyte Volume Ratio on Electroluminescence of Porous Silicon Nanostructures (PSiNs) Intensity / M. Ain Zubaidah, N.A. Asli, M. Rusop Mahmood and S. Abdullah -- Anodisation Time-Related Nanocrystallite Size of Porous Silicon Template Studied by Raman Spectroscopy, Photoluminescence and Fourier Transforms Infrared Spectroscopy / N.A. Asli, M. Rusop and S. Abdullah -- Qualitative Analysis of the Effect of Polymer Solution and Suspension Properties on the Electrospinning of Nanocomposite Fibers / K. Araño, M.L. Dela Cruz, E.M. Dela Pena and L.J. Diaz -- Surface and Structural Properties of TiO2 Nanotubes Formation via Electrochemical Anodization / N.A. Jani, M.F. Achoi, M.M. Mahat, S. Abdullah, Z. Lockman and A.F. Mohd Noor. Chapter 2: Polymer, Composite and Advanced Materials -- Transparent Ultraviolet Sensors Based on Magnetron Sputtered ZnO Thin Films / J.W. Hoon, K.Y. Chan, Z.N. Ng and T.Y. Tou -- Facile Synthesis of Polyaniline-Silver Composites through Interfacial Polymerization / A. Abdolahi, E. Hamzah, Z. Ibrahim and S. Hashim -- Activated Carbon Fiber Derived from Pyrolysis of Palm Fiber / T. Lee, A. Matsumoto, R. Othman and F.Y. Yeoh -- Analysis of Delaminated Composite Plates / A. Mahieddine and M. Ouali -- The Properties of Activated Carbon Fiber Derived from Direct Activation from Oil Palm Empty Fruit Bunch Fiber / C.H. Ooi, C.L. Ang and F.Y. Yeoh -- Flow Behavior in the Resin Infusion of Glass Fiber Reinforced Polymer Wind Turbine Blade / M.A. Mohd Azlan, M.R. Abdul Latif, M.Z. Abdullah, K.A. Zainal Abidin and A. Abdul Wahab -- Effect of Coupling Agent on Mechanical and Thermal Behaviour of Oil Palm/Jute Hybrid Composites / M. Jawaid, A. Hassan and H.P.S.A. Khalil -- Effects of Different Types of Crosslinking of Epoxidized Natural Rubber in Semi-Metallic Friction Materials on Friction Performance / A. Almaslow, C.T. Ratnam, M.J. Ghazali, R.J. Talib and C.H. Azhari -- Transport and Morphological Properties of Gel Polymer Electrolytes Containing Mg(CF3SO3)2 / N.H. Zainol, Z. Osman, L. Othman and K.B. Md. Isa -- Mechanical Properties of Chitosan Modified Montmorillonite Filled Tapioca Starch Nanocomposite Films / S.W. Abdul Ghani, A. Abu Bakar and S.A. Samsudin. Chapter 3: Metals and Alloys -- Fabrication and Characterisation of Powder Metallurgy Fe-Cr Matrix Composites Reinforced with Al2O3 / S. Shamsuddin, S.B. Jamaludin, Z. Hussain and Z.A. Ahmad -- Effect of Sintering Conditions on Mechanical Properties and Microstructure of Titanium Alloy Produced by Metal Injection Moulding (MIM) / M.J. Bin Suleiman Ahmad, M.A. Bin Ahmad, R. Bin Ibrahim, M. Bin Mohamad, N.B. Abu Kasim, M.R. Bin Dato'Abdul Kadir, S. Bin Muhamad, Y. Itoh, K. Hanada and T. Shimizu -- High Temperature Creep Behavior of Austenitic Fe-Ni-Cr Alloy / E. Hamzah, M. Mudang, A. Khwang Jenq and M. Adil Khattak -- Effect of Ageing Treatment on the Microstructures of Ti-50.7at.%Ni Shape Memory Alloy / K. Hastuti, E. Hamzah and J. Hashim -- Effect of Annealing Treatment on the Wear Properties of Ni Rich NiTi Alloy Coatings / T. Abubakar, M. Rahman and J. Stokes -- Interfacial Morphology Studies of Sn-3.8Ag-0.7Cu Alloy on Different Substrates / Y.K. Tian and M.C. Wong -- The Elaboration of an Iron Aluminium Alloy and the Study of Impact of the Addition Element on its Physical and Mechanical Properties / N. Metidji, N.E. Bacha, D. Saidi and S. Boutarfaia. Chapter 4: Corrosion and Coating Technology -- Effects of Cathodic Protection and Coating on the Corrosion Rate of Carbon Steel in Stagnant and Flowing Freshwater / A. Ahdash, E. Hamzah, A. Ourdjini and S.R. Shamsuri -- Study on Fly Ash Based Geopolymer for Coating Applications / M.M. Al Bakri Abdullah, L. Jamaludin, H. Kamarudin, M. Binhussain, C.M. Ruzaidi Ghazali and A.M. Izzat -- Corrosion Behavior of X52 Steel in High Pressure CO2 Environment / A.H. Mustafa, B. Ari-Wahjoedi and M.C. Ismail -- Effect of Nanoparticle Addition in Hybrid Sol-Gel Silane Coating on Corrosion Resistance of Low Carbon Steel / P. Balan, A. Ng, C. Beng Siang, R.K. Singh Raman and C. Eng Seng -- Corrosion Behaviour of Lead-Free and Sn-Pb Solders in 3.5wt% NaCl / A. Kamarul Asri and E. Hamzah -- The Influence of Anode Profiles for Three Dimensions Numerical Simulation of Reinforced Concrete Corrosion Using Boundary Element Method / M. Ihsan, S. Fonna, M. Ridha, S. Huzni and A.K. Ariffin -- The Influence of Inertia Weight on Particle Swarm Optimization in Boundary Element Inverse Analysis for Rebar Corrosion Detection / S. Fonna, M. Ridha, S. Huzni and A.K. Ariffin. Chapter 5: Ceramic Materials -- Optimum Powder Loading of Feedstock Based on an Alumina-Zirconia Powder for Ceramic Injection Molding / S.M. Ani, A. Muchtar, N. Muhamad and J.A. Ghani -- Fabrication and Characterization of Ceramic Membrane by Gel Cast Technique for Water Filtration / N. Ahmad, N. Binti Mohd Zaidan and M. Mohd Bazin -- Physical Properties of the Amorphous Silica Encapsulated Fluorescence Dye / Z. Nor Dyana, A.R. Khairunisak and A.A. Azlan -- Sintering of HA/Zirconia Composite for Biomedical and Dental Applications: A Review / K.F. Lim, M. Andanastuti, R. Mustaffa and C.Y. Tan -- Nanoclay-Supported Zero-Valent Iron as an Efficient Adsorbent Material for Arsenic / M.L. Dela Cruz, K. Araño, E.M. Dela Pena and L.J. Diaz -- Study on Fabrication of Ceramic Membrane from Shirasu Balloon for Waste Water Filtration / N. Ahmad, N. Yuzo, H. Kamibayasi and M. Mohamed Bazin. Chapter 6: Materials Processing and Technology -- Effect of Compaction Load and Heat Treatment in Manufacturing of HSS Cutting Inserts under Nitrogen-Based Atmosphere / R.J. Talib, A.A. Mahaidin, S.A. Manaf, M.F. Fazira and M.A. Selamat -- Prediction of Welding Parameters and Weld Bead Geometry for GMAW Process in Overhead T-Fillet Welding Position (4F) / M.Y. Yaakub, G. Tham, W.M.A. Wan Abd Rahim, M.A.R. Mohd Radzi and A. Mahmud -- XRD Studies on Residual Stress of the Diamond Films Grown Using Hot Filament Chemical Vapour Deposition Technique on Silicon Nitride and Tungsten Carbide Substrates / E. Hamzah, T.M. Yong and K.C.M. Fai -- Synthesis and Development of Polymers-Infiltrated Porous Iron for Temporary Medical Implants: A Preliminary Result / A.H. Yusop and H. Hermawan -- Preparation and Characterization of Amine-Functionalised SBA-15 / W.K. Cheah, W.L. Thung, R. Othman and F.Y. Yeoh. Online resource; title from PDF title page (EBSCOhost eBook Collection, viewed November 18, 2013). Volume is indexed by Thomson Reuters CPCI-S (WoS).This volume consists of 46 peer-reviewed papers ranging from fundamental academic research to applied technology research, which are grouped into 6 chapters: Nanomaterials and green technology; Polymer, composite and advanced materials; Metals and alloys; Corrosion and coating technology; Ceramic materials; Materials processing and technology. It provides incomparable coverage of the current state of the art. The Institute of Materials Malaysia has been organizing the biennial conference since 1990, and over 300 papers were presented at its 2012 incarnation. Of those, 46 were selected for publication in the proceedings. They cover nanomaterials and green technology; polymer, composite, and advanced materials; metals and alloys; corrosion and coating technology; ceramic materials; and material processing and technology. Among specific topics are the effect of milling time on the production of herbal nanopowders, flow behavior in the resin infusion of a glass-fiber-reinforced polymer wind turbine blade, mechanical properties of chitosan-modified montmorillinite-filled tapioca starch nanocomposite films, fabricating and characterizing ceramic membrane by a gel-cast technique for filtering water, and zero-valent iron supported by nano-clay as an efficient adsorbent material for arsenic. Materials Congresses. Green technology Congresses. Technologie de protection de l'environnement Congrès. Matériaux Congrès. TECHNOLOGY & ENGINEERING Environmental General. bisacsh Green technology fast Materials fast Conference papers and proceedings fast Harun, M. K., editor edc Yahya, M. Z. A., editor edc Abdullah, S., editor edc Chan, C. H., editor edc Print version: International Materials Technology Conference & Exhibition (8th : 2012 : Petaling Jaya, Malaysia). Green technologies for sustainable & innovation in materials. Durnten-Zurich, Switzerland : Trans Tech Publications Ltd, [2013] 3037856580 9783037856581 (OCoLC)854616254 Advanced materials research ; v. 686. 1022-6680 http://id.loc.gov/authorities/names/n99255722 FWS01 ZDB-4-EBA FWS_PDA_EBA https://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=646095 Volltext |
| spellingShingle | Green technologies for sustainable & innovation in materials : selected, peer reviewed papers from the 8th international materials technology conference & exhibition (IMTCE 2012), July 9-12th, 2012, Petaling Jaya, Malaysia / Advanced materials research ; Nanomaterials and Green Technology -- Production of Herbal Nanopowders: Effect of Milling Time / Green Synthesis of 10 nm Gold Nanoparticles via Seeded-Growth Method and its Conjugation Properties on Lateral Flow Immunoassay / Morphology and Dimensions Controlled of Titania Nanotubes in Mixed Organic-Inorganic Electrolyte / One-Dimensional TiO2 Nanothorn-Like Structures Assisted TiO2 Template for High Absorption Hydrophilic Self-Cleaning / The Structural Properties of Carbon Nanotubes Grown on Porous Silicon-Based Materials by Thermal Chemical Vapor Deposition Method / Synthesis of Nanoporous Carbonated Hydroxyapatite Using Non-Ionic Pluronics Surfactant / Effect of Sintering Temperature on the Mechanical Properties of Nanostructured Zirconia Fabricated via Colloidal Processing / Effect of Electrolyte Volume Ratio on Electroluminescence of Porous Silicon Nanostructures (PSiNs) Intensity / Anodisation Time-Related Nanocrystallite Size of Porous Silicon Template Studied by Raman Spectroscopy, Photoluminescence and Fourier Transforms Infrared Spectroscopy / Qualitative Analysis of the Effect of Polymer Solution and Suspension Properties on the Electrospinning of Nanocomposite Fibers / Surface and Structural Properties of TiO2 Nanotubes Formation via Electrochemical Anodization / Polymer, Composite and Advanced Materials -- Transparent Ultraviolet Sensors Based on Magnetron Sputtered ZnO Thin Films / Facile Synthesis of Polyaniline-Silver Composites through Interfacial Polymerization / Activated Carbon Fiber Derived from Pyrolysis of Palm Fiber / Analysis of Delaminated Composite Plates / The Properties of Activated Carbon Fiber Derived from Direct Activation from Oil Palm Empty Fruit Bunch Fiber / Flow Behavior in the Resin Infusion of Glass Fiber Reinforced Polymer Wind Turbine Blade / Effect of Coupling Agent on Mechanical and Thermal Behaviour of Oil Palm/Jute Hybrid Composites / Effects of Different Types of Crosslinking of Epoxidized Natural Rubber in Semi-Metallic Friction Materials on Friction Performance / Transport and Morphological Properties of Gel Polymer Electrolytes Containing Mg(CF3SO3)2 / Mechanical Properties of Chitosan Modified Montmorillonite Filled Tapioca Starch Nanocomposite Films / Metals and Alloys -- Fabrication and Characterisation of Powder Metallurgy Fe-Cr Matrix Composites Reinforced with Al2O3 / Effect of Sintering Conditions on Mechanical Properties and Microstructure of Titanium Alloy Produced by Metal Injection Moulding (MIM) / High Temperature Creep Behavior of Austenitic Fe-Ni-Cr Alloy / Effect of Ageing Treatment on the Microstructures of Ti-50.7at.%Ni Shape Memory Alloy / Effect of Annealing Treatment on the Wear Properties of Ni Rich NiTi Alloy Coatings / Interfacial Morphology Studies of Sn-3.8Ag-0.7Cu Alloy on Different Substrates / The Elaboration of an Iron Aluminium Alloy and the Study of Impact of the Addition Element on its Physical and Mechanical Properties / Corrosion and Coating Technology -- Effects of Cathodic Protection and Coating on the Corrosion Rate of Carbon Steel in Stagnant and Flowing Freshwater / Study on Fly Ash Based Geopolymer for Coating Applications / Corrosion Behavior of X52 Steel in High Pressure CO2 Environment / Effect of Nanoparticle Addition in Hybrid Sol-Gel Silane Coating on Corrosion Resistance of Low Carbon Steel / Corrosion Behaviour of Lead-Free and Sn-Pb Solders in 3.5wt% NaCl / The Influence of Anode Profiles for Three Dimensions Numerical Simulation of Reinforced Concrete Corrosion Using Boundary Element Method / The Influence of Inertia Weight on Particle Swarm Optimization in Boundary Element Inverse Analysis for Rebar Corrosion Detection / Ceramic Materials -- Optimum Powder Loading of Feedstock Based on an Alumina-Zirconia Powder for Ceramic Injection Molding / Fabrication and Characterization of Ceramic Membrane by Gel Cast Technique for Water Filtration / Physical Properties of the Amorphous Silica Encapsulated Fluorescence Dye / Sintering of HA/Zirconia Composite for Biomedical and Dental Applications: A Review / Nanoclay-Supported Zero-Valent Iron as an Efficient Adsorbent Material for Arsenic / Study on Fabrication of Ceramic Membrane from Shirasu Balloon for Waste Water Filtration / Materials Processing and Technology -- Effect of Compaction Load and Heat Treatment in Manufacturing of HSS Cutting Inserts under Nitrogen-Based Atmosphere / Prediction of Welding Parameters and Weld Bead Geometry for GMAW Process in Overhead T-Fillet Welding Position (4F) / XRD Studies on Residual Stress of the Diamond Films Grown Using Hot Filament Chemical Vapour Deposition Technique on Silicon Nitride and Tungsten Carbide Substrates / Synthesis and Development of Polymers-Infiltrated Porous Iron for Temporary Medical Implants: A Preliminary Result / Preparation and Characterization of Amine-Functionalised SBA-15 / Materials Congresses. Green technology Congresses. Technologie de protection de l'environnement Congrès. Matériaux Congrès. TECHNOLOGY & ENGINEERING Environmental General. bisacsh Green technology fast Materials fast |
| title | Green technologies for sustainable & innovation in materials : selected, peer reviewed papers from the 8th international materials technology conference & exhibition (IMTCE 2012), July 9-12th, 2012, Petaling Jaya, Malaysia / |
| title_alt | Nanomaterials and Green Technology -- Production of Herbal Nanopowders: Effect of Milling Time / Green Synthesis of 10 nm Gold Nanoparticles via Seeded-Growth Method and its Conjugation Properties on Lateral Flow Immunoassay / Morphology and Dimensions Controlled of Titania Nanotubes in Mixed Organic-Inorganic Electrolyte / One-Dimensional TiO2 Nanothorn-Like Structures Assisted TiO2 Template for High Absorption Hydrophilic Self-Cleaning / The Structural Properties of Carbon Nanotubes Grown on Porous Silicon-Based Materials by Thermal Chemical Vapor Deposition Method / Synthesis of Nanoporous Carbonated Hydroxyapatite Using Non-Ionic Pluronics Surfactant / Effect of Sintering Temperature on the Mechanical Properties of Nanostructured Zirconia Fabricated via Colloidal Processing / Effect of Electrolyte Volume Ratio on Electroluminescence of Porous Silicon Nanostructures (PSiNs) Intensity / Anodisation Time-Related Nanocrystallite Size of Porous Silicon Template Studied by Raman Spectroscopy, Photoluminescence and Fourier Transforms Infrared Spectroscopy / Qualitative Analysis of the Effect of Polymer Solution and Suspension Properties on the Electrospinning of Nanocomposite Fibers / Surface and Structural Properties of TiO2 Nanotubes Formation via Electrochemical Anodization / Polymer, Composite and Advanced Materials -- Transparent Ultraviolet Sensors Based on Magnetron Sputtered ZnO Thin Films / Facile Synthesis of Polyaniline-Silver Composites through Interfacial Polymerization / Activated Carbon Fiber Derived from Pyrolysis of Palm Fiber / Analysis of Delaminated Composite Plates / The Properties of Activated Carbon Fiber Derived from Direct Activation from Oil Palm Empty Fruit Bunch Fiber / Flow Behavior in the Resin Infusion of Glass Fiber Reinforced Polymer Wind Turbine Blade / Effect of Coupling Agent on Mechanical and Thermal Behaviour of Oil Palm/Jute Hybrid Composites / Effects of Different Types of Crosslinking of Epoxidized Natural Rubber in Semi-Metallic Friction Materials on Friction Performance / Transport and Morphological Properties of Gel Polymer Electrolytes Containing Mg(CF3SO3)2 / Mechanical Properties of Chitosan Modified Montmorillonite Filled Tapioca Starch Nanocomposite Films / Metals and Alloys -- Fabrication and Characterisation of Powder Metallurgy Fe-Cr Matrix Composites Reinforced with Al2O3 / Effect of Sintering Conditions on Mechanical Properties and Microstructure of Titanium Alloy Produced by Metal Injection Moulding (MIM) / High Temperature Creep Behavior of Austenitic Fe-Ni-Cr Alloy / Effect of Ageing Treatment on the Microstructures of Ti-50.7at.%Ni Shape Memory Alloy / Effect of Annealing Treatment on the Wear Properties of Ni Rich NiTi Alloy Coatings / Interfacial Morphology Studies of Sn-3.8Ag-0.7Cu Alloy on Different Substrates / The Elaboration of an Iron Aluminium Alloy and the Study of Impact of the Addition Element on its Physical and Mechanical Properties / Corrosion and Coating Technology -- Effects of Cathodic Protection and Coating on the Corrosion Rate of Carbon Steel in Stagnant and Flowing Freshwater / Study on Fly Ash Based Geopolymer for Coating Applications / Corrosion Behavior of X52 Steel in High Pressure CO2 Environment / Effect of Nanoparticle Addition in Hybrid Sol-Gel Silane Coating on Corrosion Resistance of Low Carbon Steel / Corrosion Behaviour of Lead-Free and Sn-Pb Solders in 3.5wt% NaCl / The Influence of Anode Profiles for Three Dimensions Numerical Simulation of Reinforced Concrete Corrosion Using Boundary Element Method / The Influence of Inertia Weight on Particle Swarm Optimization in Boundary Element Inverse Analysis for Rebar Corrosion Detection / Ceramic Materials -- Optimum Powder Loading of Feedstock Based on an Alumina-Zirconia Powder for Ceramic Injection Molding / Fabrication and Characterization of Ceramic Membrane by Gel Cast Technique for Water Filtration / Physical Properties of the Amorphous Silica Encapsulated Fluorescence Dye / Sintering of HA/Zirconia Composite for Biomedical and Dental Applications: A Review / Nanoclay-Supported Zero-Valent Iron as an Efficient Adsorbent Material for Arsenic / Study on Fabrication of Ceramic Membrane from Shirasu Balloon for Waste Water Filtration / Materials Processing and Technology -- Effect of Compaction Load and Heat Treatment in Manufacturing of HSS Cutting Inserts under Nitrogen-Based Atmosphere / Prediction of Welding Parameters and Weld Bead Geometry for GMAW Process in Overhead T-Fillet Welding Position (4F) / XRD Studies on Residual Stress of the Diamond Films Grown Using Hot Filament Chemical Vapour Deposition Technique on Silicon Nitride and Tungsten Carbide Substrates / Synthesis and Development of Polymers-Infiltrated Porous Iron for Temporary Medical Implants: A Preliminary Result / Preparation and Characterization of Amine-Functionalised SBA-15 / |
| title_auth | Green technologies for sustainable & innovation in materials : selected, peer reviewed papers from the 8th international materials technology conference & exhibition (IMTCE 2012), July 9-12th, 2012, Petaling Jaya, Malaysia / |
| title_exact_search | Green technologies for sustainable & innovation in materials : selected, peer reviewed papers from the 8th international materials technology conference & exhibition (IMTCE 2012), July 9-12th, 2012, Petaling Jaya, Malaysia / |
| title_full | Green technologies for sustainable & innovation in materials : selected, peer reviewed papers from the 8th international materials technology conference & exhibition (IMTCE 2012), July 9-12th, 2012, Petaling Jaya, Malaysia / edited by M.K. Harun, M.Z.A. Yahya, S. Abdullah and C.H. Chan. |
| title_fullStr | Green technologies for sustainable & innovation in materials : selected, peer reviewed papers from the 8th international materials technology conference & exhibition (IMTCE 2012), July 9-12th, 2012, Petaling Jaya, Malaysia / edited by M.K. Harun, M.Z.A. Yahya, S. Abdullah and C.H. Chan. |
| title_full_unstemmed | Green technologies for sustainable & innovation in materials : selected, peer reviewed papers from the 8th international materials technology conference & exhibition (IMTCE 2012), July 9-12th, 2012, Petaling Jaya, Malaysia / edited by M.K. Harun, M.Z.A. Yahya, S. Abdullah and C.H. Chan. |
| title_short | Green technologies for sustainable & innovation in materials : |
| title_sort | green technologies for sustainable innovation in materials selected peer reviewed papers from the 8th international materials technology conference exhibition imtce 2012 july 9 12th 2012 petaling jaya malaysia |
| title_sub | selected, peer reviewed papers from the 8th international materials technology conference & exhibition (IMTCE 2012), July 9-12th, 2012, Petaling Jaya, Malaysia / |
| topic | Materials Congresses. Green technology Congresses. Technologie de protection de l'environnement Congrès. Matériaux Congrès. TECHNOLOGY & ENGINEERING Environmental General. bisacsh Green technology fast Materials fast |
| topic_facet | Materials Congresses. Green technology Congresses. Technologie de protection de l'environnement Congrès. Matériaux Congrès. TECHNOLOGY & ENGINEERING Environmental General. Green technology Materials Conference papers and proceedings |
| url | https://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=646095 |
| work_keys_str_mv | AT internationalmaterialstechnologyconferenceexhibitionpetalingjayamalaysia greentechnologiesforsustainableinnovationinmaterialsselectedpeerreviewedpapersfromthe8thinternationalmaterialstechnologyconferenceexhibitionimtce2012july912th2012petalingjayamalaysia AT harunmk greentechnologiesforsustainableinnovationinmaterialsselectedpeerreviewedpapersfromthe8thinternationalmaterialstechnologyconferenceexhibitionimtce2012july912th2012petalingjayamalaysia AT yahyamza greentechnologiesforsustainableinnovationinmaterialsselectedpeerreviewedpapersfromthe8thinternationalmaterialstechnologyconferenceexhibitionimtce2012july912th2012petalingjayamalaysia AT abdullahs greentechnologiesforsustainableinnovationinmaterialsselectedpeerreviewedpapersfromthe8thinternationalmaterialstechnologyconferenceexhibitionimtce2012july912th2012petalingjayamalaysia AT chanch greentechnologiesforsustainableinnovationinmaterialsselectedpeerreviewedpapersfromthe8thinternationalmaterialstechnologyconferenceexhibitionimtce2012july912th2012petalingjayamalaysia |