An introduction to transport phenomena in materials engineering /:
In their classic text, Transport Phenomena, Bird, Stewart. and Lightfoot state their opinion that the subject of transport phenomena should rank along with thermodynamics, mechanics, and electromagnetism as one of the "key engineering sciences." This thought was not shared by many traditio...
Gespeichert in:
| 1. Verfasser: | |
|---|---|
| Format: | Elektronisch E-Book |
| Sprache: | English |
| Veröffentlicht: |
[New York, N.Y.] (222 East 46th Street, New York, NY 10017) :
Momentum Press,
2012.
|
| Ausgabe: | 2nd ed. |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Zusammenfassung: | In their classic text, Transport Phenomena, Bird, Stewart. and Lightfoot state their opinion that the subject of transport phenomena should rank along with thermodynamics, mechanics, and electromagnetism as one of the "key engineering sciences." This thought was not shared by many traditional metallurgists, and diffusion in the solid state was the only aspect of transport phenomena included in many traditional university metallurgy curricula. However, as metallurgists transformed themselves into materials scientists and engineers, and the artificial barriers between the various engineering disciplines were lowered, the materials engineers began to see the truth in the opinion of Bird, Stewart, and Lightfoot. The major difference, however, between the first and this edition is that this edition contains an additional chapter, Chapter 12, titled "Boiling and Condensation." The material presented in this chapter is particularly important in view of the current interest in Renewal Energy Resources involving such devices as windmills and solar panels. Developments in this field require a thorough familiarity with the phenomena and mechanisms of boiling and condensation. |
| Beschreibung: | Title from PDF title page (viewed on September 17, 2012). |
| Beschreibung: | 1 online resource (1 online resource (xx, 663 pages)) |
| Bibliographie: | Includes bibliographical references (pages 642-643) and index. |
| ISBN: | 9781606503577 160650357X 1606503553 9781606503553 |
Internformat
MARC
| LEADER | 00000cam a2200000 a 4500 | ||
|---|---|---|---|
| 001 | ZDB-4-EBA-ocn810803301 | ||
| 003 | OCoLC | ||
| 005 | 20241004212047.0 | ||
| 006 | m o d | ||
| 007 | cr cn||||m|||a | ||
| 008 | 120923s2012 nyu foab 001 0 eng d | ||
| 040 | |a CaBNvSL |b eng |e pn |c J2I |d J2I |d YDXCP |d NYMPP |d N$T |d E7B |d EBLCP |d IDEBK |d DEBSZ |d OCLCQ |d AGLDB |d CPO |d MERER |d OCLCQ |d UPM |d NJR |d OCLCF |d JBG |d VTS |d STF |d LOA |d CUY |d MERUC |d ZCU |d OCLCQ |d ICG |d INT |d K6U |d VT2 |d U3W |d CNCEN |d AU@ |d OCLCQ |d WYU |d G3B |d LVT |d S8J |d S9I |d D6H |d DKC |d OCLCQ |d M8D |d UKAHL |d OCLCQ |d OCLCO |d OCLCQ |d OCLCO |d OCLCL |d OCLCQ |d UEJ |d OCLCQ | ||
| 019 | |a 818863509 |a 984521406 |a 1055378857 |a 1058030832 |a 1058496474 |a 1081279814 |a 1097084324 |a 1228615153 | ||
| 020 | |a 9781606503577 |q (electronic bk.) | ||
| 020 | |a 160650357X |q (electronic bk.) | ||
| 020 | |a 1606503553 | ||
| 020 | |a 9781606503553 | ||
| 020 | |z 9781606503553 |q (print) | ||
| 020 | |z 1606503553 |q (print) | ||
| 024 | 7 | |a 10.5643/9781606503577 |2 doi | |
| 024 | 3 | |a 9781606503553 | |
| 035 | |a (OCoLC)810803301 |z (OCoLC)818863509 |z (OCoLC)984521406 |z (OCoLC)1055378857 |z (OCoLC)1058030832 |z (OCoLC)1058496474 |z (OCoLC)1081279814 |z (OCoLC)1097084324 |z (OCoLC)1228615153 | ||
| 037 | |b 01463640 | ||
| 050 | 4 | |a TA418.5 |b .G275 2012 | |
| 072 | 7 | |a SCI |x 050000 |2 bisacsh | |
| 082 | 7 | |a 620.1129 |2 23 | |
| 049 | |a MAIN | ||
| 100 | 1 | |a Gaskell, David R., |d 1940- |1 https://id.oclc.org/worldcat/entity/E39PCjHFyPfdTW7TDg6rDM4C73 |0 http://id.loc.gov/authorities/names/n81010429 | |
| 245 | 1 | 3 | |a An introduction to transport phenomena in materials engineering / |c David R. Gaskell. |
| 250 | |a 2nd ed. | ||
| 260 | |a [New York, N.Y.] (222 East 46th Street, New York, NY 10017) : |b Momentum Press, |c 2012. | ||
| 300 | |a 1 online resource (1 online resource (xx, 663 pages)) | ||
| 336 | |a text |b txt |2 rdacontent | ||
| 337 | |a computer |b c |2 rdamedia | ||
| 338 | |a online resource |b cr |2 rdacarrier | ||
| 500 | |a Title from PDF title page (viewed on September 17, 2012). | ||
| 504 | |a Includes bibliographical references (pages 642-643) and index. | ||
| 505 | 0 | |a List of symbols. | |
| 505 | 8 | |a 1. Engineering units and pressure in static fluids -- 1.1 Origins of engineering units -- 1.2 Concept of pressure -- 1.3 Measurement of pressure -- 1.4 Pressure in incompressible fluids -- 1.5 Buoyancy -- 1.6 Summary -- Problems. | |
| 505 | 8 | |a 2. Momentum transport and laminar flow of Newtonian fluids -- 2.1 Introduction -- 2.2 Newton's lax of viscosity -- 2.3 Conservation of momentum in steady-state flow -- 2.4 Fluid flow between two flat parallel plates -- 2.5 Fluid flow down in inclined plane -- 2.6 Fluid flow in a vertical cylindrical tube -- 2.7 Capillary flowmeter -- 2.8 Fluid flow in an annulus -- 2.9 Mean residence time -- 2.10 Calculation of viscosity from the kinetic theory of gases -- 2.11 Viscosities of liquid metals -- 2.12 Summary -- Problems. | |
| 505 | 8 | |a 3. Equations of continuity and conservation of momentum and fluid flow past submerged objects -- 3.1 Introduction -- 3.2 Equation of continuity -- 3.3 Conservation of momentum -- 3.4 Navier-Stokes equation for fluids of constant density and viscosity -- 3.5 Fluid flow over a horizontal flat plane -- 3.6 Approximate integral method in obtaining boundary layer thickness -- 3.7 Creeping flow past a sphere -- 3.8 Summary -- Problems. | |
| 505 | 8 | |a 4. Turbulent flow -- 4.1 Introduction -- 4.2 Graphical representation of fluid flow -- 4.3 Friction factor and turbulent flow in cylindrical pipes -- 4.4 Flow over a flat plate -- 4.5 Flow past a submerged sphere -- 4.6 Flow past a submerged cylinder -- 4.7 Flow through packed beds -- 4.8 Fluidized beds -- 4.9 Summary -- Problems. | |
| 505 | 8 | |a 5. Mechanical energy balance and its application to fluid flow -- 5.1 Introduction -- 5.2 Bernoulli's equation -- 5.3 Friction loss, Ef -- 5.4 Influence of bends, fittings, and changes in the pipe radius -- 5.5 Concept of head -- 5.6 Fluid flow in an open channel -- 5.7 Drainage from a vessel -- 5.8 Emptying a vessel by discharge through an orifice -- 5.9 Drainage of a vessel using a drainage tube -- 5.10 Emptying a vessel by drainage through a drainage tube -- 5.11 Bernoulli equation for flow of compressible fluids -- 5.12 Pilot tube -- 5.13 Orifice plate -- 5.14 Summary -- Problems. | |
| 505 | 8 | |a 6. Transport of heat by conduction -- 6.1 Introduction -- 6.2 Fourier's law and Newton's law -- 6.3 Conduction -- 6.4 Conduction in heat sources -- 6.5 Thermal conductivity and the kinetic theory of gases -- 6.6 General heat conduction equation -- 6.7 Conduction of heat at steady state in two dimensions -- 6.8 Summary -- Problems. | |
| 505 | 8 | |a 7. Transport of heat by convection -- 7.1 Introduction -- 7.2 Heat transfer by forced convection from a horizontal flat plate at a uniform constant temperature -- 7.3 Heat transfer from a horizontal flat plate with uniform heat flux along the plate -- 7.4 Heat transfer during fluid flow in cylindrical pipes -- 7.5 Energy balance in heat transfer by convection between a cylindrical pipe and a flowing fluid -- 7.6 Heat transfer by forced convection from horizontal cylinders -- 7.7 Heat transfer by forced convection from a sphere -- 7.8 General energy equation -- 7.9 Heat transfer from a vertical plate by natural convection -- 7.10 Heat transfer from cylinders by natural convection -- 7.11 Summary -- Problems. | |
| 505 | 8 | |a 8. Transient heat flow -- 8.1 Introduction -- 8.2 Lumped capacitance method; Newtonian cooling -- 8.3 Non-Newtonian cooling in semi-infinite systems -- 8.4 Non-Newtonian cooling in a one-dimensional finite systems -- 8.5 Non-Newtonian cooling in a two-dimensional finite systems -- 8.6 Solidification of metal castings -- 8.7 Summary -- Problems. | |
| 505 | 8 | |a 9. Heat transport by thermal radiation -- 9.1 Introduction -- 9.2 Intensity and emissive power -- 9.3 Blackbody radiation -- 9.4 Emissivity -- 9.5 Absorptivity, reflectivity, and transmissivity -- 9.6 Kirchhoff's law and the Hohlraum -- 9.7 Radiation exchange between surfaces -- 9.8 Radiation exchange between blackbodies -- 9.9 Radiation exchange between diffuse-gray surfaces -- 9.10 Electric analogy -- 9.11 Radiation shields -- 9.12 Reradiating surface -- 9.13 Heat transfer from a surface by convection and radiation -- 9.14 Summary -- Problems. | |
| 505 | 8 | |a 10. Mass transport by diffusion in the solid state -- 10.1 Introduction -- 10.2 Atomic diffusion as a random-walk process -- 10.3 Fick 's first law of diffusion -- 10.4 One-dimensional non-steady-state diffusion in a solid; Fick's second law of diffusion -- 10.5 Infinite diffusion couple -- 10.6 One-dimensional diffusion in a semi-infinite system involving a change of phase -- 10.7 Steady-state diffusion through a composite wall -- 10.8 Diffusion in substitutional solid solutions -- 10.9 Darken's analysis -- 10.10 Self-diffusion coefficient -- 10.11 Measurement of the interdifussion coefficient: Boltzmann-Matano analysis -- 10.12 Influence of temperature on the diffusion coefficient -- 10.13 Summary -- Problems. | |
| 505 | 8 | |a 11. Mass transport in fluids -- 11.1 Introduction -- 11.2 Mass and molar fluxes in a fluid -- 11.3 Equations of diffusion with convection in a binary mixture A-B -- 11.4 One-dimensional transport in a binary mixture of ideal gases -- 11.5 Equimolar counterdiffusion -- 11.6 One-dimensional steady-state diffusion of gas A through stationary gas B -- 11.7 Sublimation of a sphere into a stationary gas -- 11.8 Film model -- 11.9 Catalytic surface reactions -- 11.10 Diffusion and chemical reaction in stagnant film -- 11.11 Mass transfer at large fluxes and large concentrations -- 11.12 Influence of mass transport on heat transfer in stagnant film -- 11.13 Diffusion into a falling film of liquid -- 11.14 Diffusion and the kinetic theory of gases -- 11.15 Mass transfer coefficient and concentration boundary layer on a flat plate -- 11.16 Approximate integral method -- 11.17 Mass transfer by free convection -- 11.18 Simultaneous heat and mass transfer: evaporate cooling -- 11.19 Chemical reaction and mass transfer: mixed control -- 11.20 Dissolution of pure metal A in liquid B: mixed control -- 11.21 Summary -- Problems. | |
| 505 | 8 | |a 12. Condensation and boiling -- 12.1 Introduction -- 12.2 Dimensionless parameters in boiling and condensation -- 12.3 Modes of boiling -- 12.4 Pool boiling correlations -- 12.5 Summary -- Problems. | |
| 505 | 8 | |a Appendix A. Elementary and derived SI units and symbols -- Appendix B. Prefixes and symbols for multiples and submultiples of SI units -- Appendix C. Conversion from British and U.S. units to SI units -- Appendix D. Properties of solid metals -- Appendix E. Properties of nonmetallic solids -- Appendix F. Properties of gases at 1 Atm pressure -- Appendix G. Properties of saturated liquids -- Appendix H. Properties of liquid metals -- Recommended readings -- Answers to problems -- Index. | |
| 520 | 3 | |a In their classic text, Transport Phenomena, Bird, Stewart. and Lightfoot state their opinion that the subject of transport phenomena should rank along with thermodynamics, mechanics, and electromagnetism as one of the "key engineering sciences." This thought was not shared by many traditional metallurgists, and diffusion in the solid state was the only aspect of transport phenomena included in many traditional university metallurgy curricula. However, as metallurgists transformed themselves into materials scientists and engineers, and the artificial barriers between the various engineering disciplines were lowered, the materials engineers began to see the truth in the opinion of Bird, Stewart, and Lightfoot. The major difference, however, between the first and this edition is that this edition contains an additional chapter, Chapter 12, titled "Boiling and Condensation." The material presented in this chapter is particularly important in view of the current interest in Renewal Energy Resources involving such devices as windmills and solar panels. Developments in this field require a thorough familiarity with the phenomena and mechanisms of boiling and condensation. | |
| 650 | 0 | |a Materials |x Transport properties. | |
| 650 | 0 | |a Materials |x Fluid dynamics. | |
| 650 | 0 | |a Mass transfer. |0 http://id.loc.gov/authorities/subjects/sh85081910 | |
| 650 | 0 | |a Heat |x Transmission. |0 http://id.loc.gov/authorities/subjects/sh85059767 | |
| 650 | 6 | |a Matériaux |x Propriétés de transport. | |
| 650 | 6 | |a Matériaux |x Dynamique des fluides. | |
| 650 | 6 | |a Transfert de masse. | |
| 650 | 6 | |a Chaleur |x Transmission. | |
| 650 | 7 | |a heat transmission. |2 aat | |
| 650 | 7 | |a SCIENCE |x Nanoscience. |2 bisacsh | |
| 650 | 7 | |a Heat |x Transmission |2 fast | |
| 650 | 7 | |a Mass transfer |2 fast | |
| 653 | |a Thermodynamics of Materials | ||
| 653 | |a High Temperature Kinetics | ||
| 653 | |a Transport Phenomena | ||
| 653 | |a Materials Processing | ||
| 758 | |i has work: |a An introduction to transport phenomena in materials engineering (Text) |1 https://id.oclc.org/worldcat/entity/E39PCFtJH93RccwBYKRdkT8Jym |4 https://id.oclc.org/worldcat/ontology/hasWork | ||
| 776 | 0 | 8 | |i Print version: |z 1606503553 |z 9781606503553 |
| 856 | 4 | 0 | |l FWS01 |p ZDB-4-EBA |q FWS_PDA_EBA |u https://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=501124 |3 Volltext |
| 938 | |a Askews and Holts Library Services |b ASKH |n AH34378854 | ||
| 938 | |a ProQuest Ebook Central |b EBLB |n EBL1023602 | ||
| 938 | |a ebrary |b EBRY |n ebr10605118 | ||
| 938 | |a EBSCOhost |b EBSC |n 501124 | ||
| 938 | |a ProQuest MyiLibrary Digital eBook Collection |b IDEB |n cis24444264 | ||
| 938 | |a Momentum Press |b NYMP |n 9781606503577 | ||
| 938 | |a YBP Library Services |b YANK |n 9733654 | ||
| 994 | |a 92 |b GEBAY | ||
| 912 | |a ZDB-4-EBA | ||
| 049 | |a DE-863 | ||
Datensatz im Suchindex
| DE-BY-FWS_katkey | ZDB-4-EBA-ocn810803301 |
|---|---|
| _version_ | 1816882207367626752 |
| adam_text | |
| any_adam_object | |
| author | Gaskell, David R., 1940- |
| author_GND | http://id.loc.gov/authorities/names/n81010429 |
| author_facet | Gaskell, David R., 1940- |
| author_role | |
| author_sort | Gaskell, David R., 1940- |
| author_variant | d r g dr drg |
| building | Verbundindex |
| bvnumber | localFWS |
| callnumber-first | T - Technology |
| callnumber-label | TA418 |
| callnumber-raw | TA418.5 .G275 2012 |
| callnumber-search | TA418.5 .G275 2012 |
| callnumber-sort | TA 3418.5 G275 42012 |
| callnumber-subject | TA - General and Civil Engineering |
| collection | ZDB-4-EBA |
| contents | List of symbols. 1. Engineering units and pressure in static fluids -- 1.1 Origins of engineering units -- 1.2 Concept of pressure -- 1.3 Measurement of pressure -- 1.4 Pressure in incompressible fluids -- 1.5 Buoyancy -- 1.6 Summary -- Problems. 2. Momentum transport and laminar flow of Newtonian fluids -- 2.1 Introduction -- 2.2 Newton's lax of viscosity -- 2.3 Conservation of momentum in steady-state flow -- 2.4 Fluid flow between two flat parallel plates -- 2.5 Fluid flow down in inclined plane -- 2.6 Fluid flow in a vertical cylindrical tube -- 2.7 Capillary flowmeter -- 2.8 Fluid flow in an annulus -- 2.9 Mean residence time -- 2.10 Calculation of viscosity from the kinetic theory of gases -- 2.11 Viscosities of liquid metals -- 2.12 Summary -- Problems. 3. Equations of continuity and conservation of momentum and fluid flow past submerged objects -- 3.1 Introduction -- 3.2 Equation of continuity -- 3.3 Conservation of momentum -- 3.4 Navier-Stokes equation for fluids of constant density and viscosity -- 3.5 Fluid flow over a horizontal flat plane -- 3.6 Approximate integral method in obtaining boundary layer thickness -- 3.7 Creeping flow past a sphere -- 3.8 Summary -- Problems. 4. Turbulent flow -- 4.1 Introduction -- 4.2 Graphical representation of fluid flow -- 4.3 Friction factor and turbulent flow in cylindrical pipes -- 4.4 Flow over a flat plate -- 4.5 Flow past a submerged sphere -- 4.6 Flow past a submerged cylinder -- 4.7 Flow through packed beds -- 4.8 Fluidized beds -- 4.9 Summary -- Problems. 5. Mechanical energy balance and its application to fluid flow -- 5.1 Introduction -- 5.2 Bernoulli's equation -- 5.3 Friction loss, Ef -- 5.4 Influence of bends, fittings, and changes in the pipe radius -- 5.5 Concept of head -- 5.6 Fluid flow in an open channel -- 5.7 Drainage from a vessel -- 5.8 Emptying a vessel by discharge through an orifice -- 5.9 Drainage of a vessel using a drainage tube -- 5.10 Emptying a vessel by drainage through a drainage tube -- 5.11 Bernoulli equation for flow of compressible fluids -- 5.12 Pilot tube -- 5.13 Orifice plate -- 5.14 Summary -- Problems. 6. Transport of heat by conduction -- 6.1 Introduction -- 6.2 Fourier's law and Newton's law -- 6.3 Conduction -- 6.4 Conduction in heat sources -- 6.5 Thermal conductivity and the kinetic theory of gases -- 6.6 General heat conduction equation -- 6.7 Conduction of heat at steady state in two dimensions -- 6.8 Summary -- Problems. 7. Transport of heat by convection -- 7.1 Introduction -- 7.2 Heat transfer by forced convection from a horizontal flat plate at a uniform constant temperature -- 7.3 Heat transfer from a horizontal flat plate with uniform heat flux along the plate -- 7.4 Heat transfer during fluid flow in cylindrical pipes -- 7.5 Energy balance in heat transfer by convection between a cylindrical pipe and a flowing fluid -- 7.6 Heat transfer by forced convection from horizontal cylinders -- 7.7 Heat transfer by forced convection from a sphere -- 7.8 General energy equation -- 7.9 Heat transfer from a vertical plate by natural convection -- 7.10 Heat transfer from cylinders by natural convection -- 7.11 Summary -- Problems. 8. Transient heat flow -- 8.1 Introduction -- 8.2 Lumped capacitance method; Newtonian cooling -- 8.3 Non-Newtonian cooling in semi-infinite systems -- 8.4 Non-Newtonian cooling in a one-dimensional finite systems -- 8.5 Non-Newtonian cooling in a two-dimensional finite systems -- 8.6 Solidification of metal castings -- 8.7 Summary -- Problems. 9. Heat transport by thermal radiation -- 9.1 Introduction -- 9.2 Intensity and emissive power -- 9.3 Blackbody radiation -- 9.4 Emissivity -- 9.5 Absorptivity, reflectivity, and transmissivity -- 9.6 Kirchhoff's law and the Hohlraum -- 9.7 Radiation exchange between surfaces -- 9.8 Radiation exchange between blackbodies -- 9.9 Radiation exchange between diffuse-gray surfaces -- 9.10 Electric analogy -- 9.11 Radiation shields -- 9.12 Reradiating surface -- 9.13 Heat transfer from a surface by convection and radiation -- 9.14 Summary -- Problems. 10. Mass transport by diffusion in the solid state -- 10.1 Introduction -- 10.2 Atomic diffusion as a random-walk process -- 10.3 Fick 's first law of diffusion -- 10.4 One-dimensional non-steady-state diffusion in a solid; Fick's second law of diffusion -- 10.5 Infinite diffusion couple -- 10.6 One-dimensional diffusion in a semi-infinite system involving a change of phase -- 10.7 Steady-state diffusion through a composite wall -- 10.8 Diffusion in substitutional solid solutions -- 10.9 Darken's analysis -- 10.10 Self-diffusion coefficient -- 10.11 Measurement of the interdifussion coefficient: Boltzmann-Matano analysis -- 10.12 Influence of temperature on the diffusion coefficient -- 10.13 Summary -- Problems. 11. Mass transport in fluids -- 11.1 Introduction -- 11.2 Mass and molar fluxes in a fluid -- 11.3 Equations of diffusion with convection in a binary mixture A-B -- 11.4 One-dimensional transport in a binary mixture of ideal gases -- 11.5 Equimolar counterdiffusion -- 11.6 One-dimensional steady-state diffusion of gas A through stationary gas B -- 11.7 Sublimation of a sphere into a stationary gas -- 11.8 Film model -- 11.9 Catalytic surface reactions -- 11.10 Diffusion and chemical reaction in stagnant film -- 11.11 Mass transfer at large fluxes and large concentrations -- 11.12 Influence of mass transport on heat transfer in stagnant film -- 11.13 Diffusion into a falling film of liquid -- 11.14 Diffusion and the kinetic theory of gases -- 11.15 Mass transfer coefficient and concentration boundary layer on a flat plate -- 11.16 Approximate integral method -- 11.17 Mass transfer by free convection -- 11.18 Simultaneous heat and mass transfer: evaporate cooling -- 11.19 Chemical reaction and mass transfer: mixed control -- 11.20 Dissolution of pure metal A in liquid B: mixed control -- 11.21 Summary -- Problems. 12. Condensation and boiling -- 12.1 Introduction -- 12.2 Dimensionless parameters in boiling and condensation -- 12.3 Modes of boiling -- 12.4 Pool boiling correlations -- 12.5 Summary -- Problems. Appendix A. Elementary and derived SI units and symbols -- Appendix B. Prefixes and symbols for multiples and submultiples of SI units -- Appendix C. Conversion from British and U.S. units to SI units -- Appendix D. Properties of solid metals -- Appendix E. Properties of nonmetallic solids -- Appendix F. Properties of gases at 1 Atm pressure -- Appendix G. Properties of saturated liquids -- Appendix H. Properties of liquid metals -- Recommended readings -- Answers to problems -- Index. |
| ctrlnum | (OCoLC)810803301 |
| dewey-full | 620.1129 |
| dewey-hundreds | 600 - Technology (Applied sciences) |
| dewey-ones | 620 - Engineering and allied operations |
| dewey-raw | 620.1129 |
| dewey-search | 620.1129 |
| dewey-sort | 3620.1129 |
| dewey-tens | 620 - Engineering and allied operations |
| edition | 2nd ed. |
| format | Electronic eBook |
| fullrecord | <?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>11604cam a2200913 a 4500</leader><controlfield tag="001">ZDB-4-EBA-ocn810803301</controlfield><controlfield tag="003">OCoLC</controlfield><controlfield tag="005">20241004212047.0</controlfield><controlfield tag="006">m o d </controlfield><controlfield tag="007">cr cn||||m|||a</controlfield><controlfield tag="008">120923s2012 nyu foab 001 0 eng d</controlfield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">CaBNvSL</subfield><subfield code="b">eng</subfield><subfield code="e">pn</subfield><subfield code="c">J2I</subfield><subfield code="d">J2I</subfield><subfield code="d">YDXCP</subfield><subfield code="d">NYMPP</subfield><subfield code="d">N$T</subfield><subfield code="d">E7B</subfield><subfield code="d">EBLCP</subfield><subfield code="d">IDEBK</subfield><subfield code="d">DEBSZ</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">AGLDB</subfield><subfield code="d">CPO</subfield><subfield code="d">MERER</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">UPM</subfield><subfield code="d">NJR</subfield><subfield code="d">OCLCF</subfield><subfield code="d">JBG</subfield><subfield code="d">VTS</subfield><subfield code="d">STF</subfield><subfield code="d">LOA</subfield><subfield code="d">CUY</subfield><subfield code="d">MERUC</subfield><subfield code="d">ZCU</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">ICG</subfield><subfield code="d">INT</subfield><subfield code="d">K6U</subfield><subfield code="d">VT2</subfield><subfield code="d">U3W</subfield><subfield code="d">CNCEN</subfield><subfield code="d">AU@</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">WYU</subfield><subfield code="d">G3B</subfield><subfield code="d">LVT</subfield><subfield code="d">S8J</subfield><subfield code="d">S9I</subfield><subfield code="d">D6H</subfield><subfield code="d">DKC</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">M8D</subfield><subfield code="d">UKAHL</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">OCLCO</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">OCLCO</subfield><subfield code="d">OCLCL</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">UEJ</subfield><subfield code="d">OCLCQ</subfield></datafield><datafield tag="019" ind1=" " ind2=" "><subfield code="a">818863509</subfield><subfield code="a">984521406</subfield><subfield code="a">1055378857</subfield><subfield code="a">1058030832</subfield><subfield code="a">1058496474</subfield><subfield code="a">1081279814</subfield><subfield code="a">1097084324</subfield><subfield code="a">1228615153</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9781606503577</subfield><subfield code="q">(electronic bk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">160650357X</subfield><subfield code="q">(electronic bk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">1606503553</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9781606503553</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="z">9781606503553</subfield><subfield code="q">(print)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="z">1606503553</subfield><subfield code="q">(print)</subfield></datafield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.5643/9781606503577</subfield><subfield code="2">doi</subfield></datafield><datafield tag="024" ind1="3" ind2=" "><subfield code="a">9781606503553</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(OCoLC)810803301</subfield><subfield code="z">(OCoLC)818863509</subfield><subfield code="z">(OCoLC)984521406</subfield><subfield code="z">(OCoLC)1055378857</subfield><subfield code="z">(OCoLC)1058030832</subfield><subfield code="z">(OCoLC)1058496474</subfield><subfield code="z">(OCoLC)1081279814</subfield><subfield code="z">(OCoLC)1097084324</subfield><subfield code="z">(OCoLC)1228615153</subfield></datafield><datafield tag="037" ind1=" " ind2=" "><subfield code="b">01463640</subfield></datafield><datafield tag="050" ind1=" " ind2="4"><subfield code="a">TA418.5</subfield><subfield code="b">.G275 2012</subfield></datafield><datafield tag="072" ind1=" " ind2="7"><subfield code="a">SCI</subfield><subfield code="x">050000</subfield><subfield code="2">bisacsh</subfield></datafield><datafield tag="082" ind1="7" ind2=" "><subfield code="a">620.1129</subfield><subfield code="2">23</subfield></datafield><datafield tag="049" ind1=" " ind2=" "><subfield code="a">MAIN</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Gaskell, David R.,</subfield><subfield code="d">1940-</subfield><subfield code="1">https://id.oclc.org/worldcat/entity/E39PCjHFyPfdTW7TDg6rDM4C73</subfield><subfield code="0">http://id.loc.gov/authorities/names/n81010429</subfield></datafield><datafield tag="245" ind1="1" ind2="3"><subfield code="a">An introduction to transport phenomena in materials engineering /</subfield><subfield code="c">David R. Gaskell.</subfield></datafield><datafield tag="250" ind1=" " ind2=" "><subfield code="a">2nd ed.</subfield></datafield><datafield tag="260" ind1=" " ind2=" "><subfield code="a">[New York, N.Y.] (222 East 46th Street, New York, NY 10017) :</subfield><subfield code="b">Momentum Press,</subfield><subfield code="c">2012.</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">1 online resource (1 online resource (xx, 663 pages))</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">computer</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">online resource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">Title from PDF title page (viewed on September 17, 2012).</subfield></datafield><datafield tag="504" ind1=" " ind2=" "><subfield code="a">Includes bibliographical references (pages 642-643) and index.</subfield></datafield><datafield tag="505" ind1="0" ind2=" "><subfield code="a">List of symbols.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">1. Engineering units and pressure in static fluids -- 1.1 Origins of engineering units -- 1.2 Concept of pressure -- 1.3 Measurement of pressure -- 1.4 Pressure in incompressible fluids -- 1.5 Buoyancy -- 1.6 Summary -- Problems.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">2. Momentum transport and laminar flow of Newtonian fluids -- 2.1 Introduction -- 2.2 Newton's lax of viscosity -- 2.3 Conservation of momentum in steady-state flow -- 2.4 Fluid flow between two flat parallel plates -- 2.5 Fluid flow down in inclined plane -- 2.6 Fluid flow in a vertical cylindrical tube -- 2.7 Capillary flowmeter -- 2.8 Fluid flow in an annulus -- 2.9 Mean residence time -- 2.10 Calculation of viscosity from the kinetic theory of gases -- 2.11 Viscosities of liquid metals -- 2.12 Summary -- Problems.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">3. Equations of continuity and conservation of momentum and fluid flow past submerged objects -- 3.1 Introduction -- 3.2 Equation of continuity -- 3.3 Conservation of momentum -- 3.4 Navier-Stokes equation for fluids of constant density and viscosity -- 3.5 Fluid flow over a horizontal flat plane -- 3.6 Approximate integral method in obtaining boundary layer thickness -- 3.7 Creeping flow past a sphere -- 3.8 Summary -- Problems.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">4. Turbulent flow -- 4.1 Introduction -- 4.2 Graphical representation of fluid flow -- 4.3 Friction factor and turbulent flow in cylindrical pipes -- 4.4 Flow over a flat plate -- 4.5 Flow past a submerged sphere -- 4.6 Flow past a submerged cylinder -- 4.7 Flow through packed beds -- 4.8 Fluidized beds -- 4.9 Summary -- Problems.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">5. Mechanical energy balance and its application to fluid flow -- 5.1 Introduction -- 5.2 Bernoulli's equation -- 5.3 Friction loss, Ef -- 5.4 Influence of bends, fittings, and changes in the pipe radius -- 5.5 Concept of head -- 5.6 Fluid flow in an open channel -- 5.7 Drainage from a vessel -- 5.8 Emptying a vessel by discharge through an orifice -- 5.9 Drainage of a vessel using a drainage tube -- 5.10 Emptying a vessel by drainage through a drainage tube -- 5.11 Bernoulli equation for flow of compressible fluids -- 5.12 Pilot tube -- 5.13 Orifice plate -- 5.14 Summary -- Problems.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">6. Transport of heat by conduction -- 6.1 Introduction -- 6.2 Fourier's law and Newton's law -- 6.3 Conduction -- 6.4 Conduction in heat sources -- 6.5 Thermal conductivity and the kinetic theory of gases -- 6.6 General heat conduction equation -- 6.7 Conduction of heat at steady state in two dimensions -- 6.8 Summary -- Problems.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">7. Transport of heat by convection -- 7.1 Introduction -- 7.2 Heat transfer by forced convection from a horizontal flat plate at a uniform constant temperature -- 7.3 Heat transfer from a horizontal flat plate with uniform heat flux along the plate -- 7.4 Heat transfer during fluid flow in cylindrical pipes -- 7.5 Energy balance in heat transfer by convection between a cylindrical pipe and a flowing fluid -- 7.6 Heat transfer by forced convection from horizontal cylinders -- 7.7 Heat transfer by forced convection from a sphere -- 7.8 General energy equation -- 7.9 Heat transfer from a vertical plate by natural convection -- 7.10 Heat transfer from cylinders by natural convection -- 7.11 Summary -- Problems.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">8. Transient heat flow -- 8.1 Introduction -- 8.2 Lumped capacitance method; Newtonian cooling -- 8.3 Non-Newtonian cooling in semi-infinite systems -- 8.4 Non-Newtonian cooling in a one-dimensional finite systems -- 8.5 Non-Newtonian cooling in a two-dimensional finite systems -- 8.6 Solidification of metal castings -- 8.7 Summary -- Problems.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">9. Heat transport by thermal radiation -- 9.1 Introduction -- 9.2 Intensity and emissive power -- 9.3 Blackbody radiation -- 9.4 Emissivity -- 9.5 Absorptivity, reflectivity, and transmissivity -- 9.6 Kirchhoff's law and the Hohlraum -- 9.7 Radiation exchange between surfaces -- 9.8 Radiation exchange between blackbodies -- 9.9 Radiation exchange between diffuse-gray surfaces -- 9.10 Electric analogy -- 9.11 Radiation shields -- 9.12 Reradiating surface -- 9.13 Heat transfer from a surface by convection and radiation -- 9.14 Summary -- Problems.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">10. Mass transport by diffusion in the solid state -- 10.1 Introduction -- 10.2 Atomic diffusion as a random-walk process -- 10.3 Fick 's first law of diffusion -- 10.4 One-dimensional non-steady-state diffusion in a solid; Fick's second law of diffusion -- 10.5 Infinite diffusion couple -- 10.6 One-dimensional diffusion in a semi-infinite system involving a change of phase -- 10.7 Steady-state diffusion through a composite wall -- 10.8 Diffusion in substitutional solid solutions -- 10.9 Darken's analysis -- 10.10 Self-diffusion coefficient -- 10.11 Measurement of the interdifussion coefficient: Boltzmann-Matano analysis -- 10.12 Influence of temperature on the diffusion coefficient -- 10.13 Summary -- Problems.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">11. Mass transport in fluids -- 11.1 Introduction -- 11.2 Mass and molar fluxes in a fluid -- 11.3 Equations of diffusion with convection in a binary mixture A-B -- 11.4 One-dimensional transport in a binary mixture of ideal gases -- 11.5 Equimolar counterdiffusion -- 11.6 One-dimensional steady-state diffusion of gas A through stationary gas B -- 11.7 Sublimation of a sphere into a stationary gas -- 11.8 Film model -- 11.9 Catalytic surface reactions -- 11.10 Diffusion and chemical reaction in stagnant film -- 11.11 Mass transfer at large fluxes and large concentrations -- 11.12 Influence of mass transport on heat transfer in stagnant film -- 11.13 Diffusion into a falling film of liquid -- 11.14 Diffusion and the kinetic theory of gases -- 11.15 Mass transfer coefficient and concentration boundary layer on a flat plate -- 11.16 Approximate integral method -- 11.17 Mass transfer by free convection -- 11.18 Simultaneous heat and mass transfer: evaporate cooling -- 11.19 Chemical reaction and mass transfer: mixed control -- 11.20 Dissolution of pure metal A in liquid B: mixed control -- 11.21 Summary -- Problems.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">12. Condensation and boiling -- 12.1 Introduction -- 12.2 Dimensionless parameters in boiling and condensation -- 12.3 Modes of boiling -- 12.4 Pool boiling correlations -- 12.5 Summary -- Problems.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">Appendix A. Elementary and derived SI units and symbols -- Appendix B. Prefixes and symbols for multiples and submultiples of SI units -- Appendix C. Conversion from British and U.S. units to SI units -- Appendix D. Properties of solid metals -- Appendix E. Properties of nonmetallic solids -- Appendix F. Properties of gases at 1 Atm pressure -- Appendix G. Properties of saturated liquids -- Appendix H. Properties of liquid metals -- Recommended readings -- Answers to problems -- Index.</subfield></datafield><datafield tag="520" ind1="3" ind2=" "><subfield code="a">In their classic text, Transport Phenomena, Bird, Stewart. and Lightfoot state their opinion that the subject of transport phenomena should rank along with thermodynamics, mechanics, and electromagnetism as one of the "key engineering sciences." This thought was not shared by many traditional metallurgists, and diffusion in the solid state was the only aspect of transport phenomena included in many traditional university metallurgy curricula. However, as metallurgists transformed themselves into materials scientists and engineers, and the artificial barriers between the various engineering disciplines were lowered, the materials engineers began to see the truth in the opinion of Bird, Stewart, and Lightfoot. The major difference, however, between the first and this edition is that this edition contains an additional chapter, Chapter 12, titled "Boiling and Condensation." The material presented in this chapter is particularly important in view of the current interest in Renewal Energy Resources involving such devices as windmills and solar panels. Developments in this field require a thorough familiarity with the phenomena and mechanisms of boiling and condensation.</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Materials</subfield><subfield code="x">Transport properties.</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Materials</subfield><subfield code="x">Fluid dynamics.</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Mass transfer.</subfield><subfield code="0">http://id.loc.gov/authorities/subjects/sh85081910</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Heat</subfield><subfield code="x">Transmission.</subfield><subfield code="0">http://id.loc.gov/authorities/subjects/sh85059767</subfield></datafield><datafield tag="650" ind1=" " ind2="6"><subfield code="a">Matériaux</subfield><subfield code="x">Propriétés de transport.</subfield></datafield><datafield tag="650" ind1=" " ind2="6"><subfield code="a">Matériaux</subfield><subfield code="x">Dynamique des fluides.</subfield></datafield><datafield tag="650" ind1=" " ind2="6"><subfield code="a">Transfert de masse.</subfield></datafield><datafield tag="650" ind1=" " ind2="6"><subfield code="a">Chaleur</subfield><subfield code="x">Transmission.</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">heat transmission.</subfield><subfield code="2">aat</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">SCIENCE</subfield><subfield code="x">Nanoscience.</subfield><subfield code="2">bisacsh</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Heat</subfield><subfield code="x">Transmission</subfield><subfield code="2">fast</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Mass transfer</subfield><subfield code="2">fast</subfield></datafield><datafield tag="653" ind1=" " ind2=" "><subfield code="a">Thermodynamics of Materials</subfield></datafield><datafield tag="653" ind1=" " ind2=" "><subfield code="a">High Temperature Kinetics</subfield></datafield><datafield tag="653" ind1=" " ind2=" "><subfield code="a">Transport Phenomena</subfield></datafield><datafield tag="653" ind1=" " ind2=" "><subfield code="a">Materials Processing</subfield></datafield><datafield tag="758" ind1=" " ind2=" "><subfield code="i">has work:</subfield><subfield code="a">An introduction to transport phenomena in materials engineering (Text)</subfield><subfield code="1">https://id.oclc.org/worldcat/entity/E39PCFtJH93RccwBYKRdkT8Jym</subfield><subfield code="4">https://id.oclc.org/worldcat/ontology/hasWork</subfield></datafield><datafield tag="776" ind1="0" ind2="8"><subfield code="i">Print version:</subfield><subfield code="z">1606503553</subfield><subfield code="z">9781606503553</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="l">FWS01</subfield><subfield code="p">ZDB-4-EBA</subfield><subfield code="q">FWS_PDA_EBA</subfield><subfield code="u">https://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=501124</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">Askews and Holts Library Services</subfield><subfield code="b">ASKH</subfield><subfield code="n">AH34378854</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">ProQuest Ebook Central</subfield><subfield code="b">EBLB</subfield><subfield code="n">EBL1023602</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">ebrary</subfield><subfield code="b">EBRY</subfield><subfield code="n">ebr10605118</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">EBSCOhost</subfield><subfield code="b">EBSC</subfield><subfield code="n">501124</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">ProQuest MyiLibrary Digital eBook Collection</subfield><subfield code="b">IDEB</subfield><subfield code="n">cis24444264</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">Momentum Press</subfield><subfield code="b">NYMP</subfield><subfield code="n">9781606503577</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">YBP Library Services</subfield><subfield code="b">YANK</subfield><subfield code="n">9733654</subfield></datafield><datafield tag="994" ind1=" " ind2=" "><subfield code="a">92</subfield><subfield code="b">GEBAY</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ZDB-4-EBA</subfield></datafield><datafield tag="049" ind1=" " ind2=" "><subfield code="a">DE-863</subfield></datafield></record></collection> |
| id | ZDB-4-EBA-ocn810803301 |
| illustrated | Not Illustrated |
| indexdate | 2024-11-27T13:24:57Z |
| institution | BVB |
| isbn | 9781606503577 160650357X 1606503553 9781606503553 |
| language | English |
| oclc_num | 810803301 |
| open_access_boolean | |
| owner | MAIN DE-863 DE-BY-FWS |
| owner_facet | MAIN DE-863 DE-BY-FWS |
| physical | 1 online resource (1 online resource (xx, 663 pages)) |
| psigel | ZDB-4-EBA |
| publishDate | 2012 |
| publishDateSearch | 2012 |
| publishDateSort | 2012 |
| publisher | Momentum Press, |
| record_format | marc |
| spelling | Gaskell, David R., 1940- https://id.oclc.org/worldcat/entity/E39PCjHFyPfdTW7TDg6rDM4C73 http://id.loc.gov/authorities/names/n81010429 An introduction to transport phenomena in materials engineering / David R. Gaskell. 2nd ed. [New York, N.Y.] (222 East 46th Street, New York, NY 10017) : Momentum Press, 2012. 1 online resource (1 online resource (xx, 663 pages)) text txt rdacontent computer c rdamedia online resource cr rdacarrier Title from PDF title page (viewed on September 17, 2012). Includes bibliographical references (pages 642-643) and index. List of symbols. 1. Engineering units and pressure in static fluids -- 1.1 Origins of engineering units -- 1.2 Concept of pressure -- 1.3 Measurement of pressure -- 1.4 Pressure in incompressible fluids -- 1.5 Buoyancy -- 1.6 Summary -- Problems. 2. Momentum transport and laminar flow of Newtonian fluids -- 2.1 Introduction -- 2.2 Newton's lax of viscosity -- 2.3 Conservation of momentum in steady-state flow -- 2.4 Fluid flow between two flat parallel plates -- 2.5 Fluid flow down in inclined plane -- 2.6 Fluid flow in a vertical cylindrical tube -- 2.7 Capillary flowmeter -- 2.8 Fluid flow in an annulus -- 2.9 Mean residence time -- 2.10 Calculation of viscosity from the kinetic theory of gases -- 2.11 Viscosities of liquid metals -- 2.12 Summary -- Problems. 3. Equations of continuity and conservation of momentum and fluid flow past submerged objects -- 3.1 Introduction -- 3.2 Equation of continuity -- 3.3 Conservation of momentum -- 3.4 Navier-Stokes equation for fluids of constant density and viscosity -- 3.5 Fluid flow over a horizontal flat plane -- 3.6 Approximate integral method in obtaining boundary layer thickness -- 3.7 Creeping flow past a sphere -- 3.8 Summary -- Problems. 4. Turbulent flow -- 4.1 Introduction -- 4.2 Graphical representation of fluid flow -- 4.3 Friction factor and turbulent flow in cylindrical pipes -- 4.4 Flow over a flat plate -- 4.5 Flow past a submerged sphere -- 4.6 Flow past a submerged cylinder -- 4.7 Flow through packed beds -- 4.8 Fluidized beds -- 4.9 Summary -- Problems. 5. Mechanical energy balance and its application to fluid flow -- 5.1 Introduction -- 5.2 Bernoulli's equation -- 5.3 Friction loss, Ef -- 5.4 Influence of bends, fittings, and changes in the pipe radius -- 5.5 Concept of head -- 5.6 Fluid flow in an open channel -- 5.7 Drainage from a vessel -- 5.8 Emptying a vessel by discharge through an orifice -- 5.9 Drainage of a vessel using a drainage tube -- 5.10 Emptying a vessel by drainage through a drainage tube -- 5.11 Bernoulli equation for flow of compressible fluids -- 5.12 Pilot tube -- 5.13 Orifice plate -- 5.14 Summary -- Problems. 6. Transport of heat by conduction -- 6.1 Introduction -- 6.2 Fourier's law and Newton's law -- 6.3 Conduction -- 6.4 Conduction in heat sources -- 6.5 Thermal conductivity and the kinetic theory of gases -- 6.6 General heat conduction equation -- 6.7 Conduction of heat at steady state in two dimensions -- 6.8 Summary -- Problems. 7. Transport of heat by convection -- 7.1 Introduction -- 7.2 Heat transfer by forced convection from a horizontal flat plate at a uniform constant temperature -- 7.3 Heat transfer from a horizontal flat plate with uniform heat flux along the plate -- 7.4 Heat transfer during fluid flow in cylindrical pipes -- 7.5 Energy balance in heat transfer by convection between a cylindrical pipe and a flowing fluid -- 7.6 Heat transfer by forced convection from horizontal cylinders -- 7.7 Heat transfer by forced convection from a sphere -- 7.8 General energy equation -- 7.9 Heat transfer from a vertical plate by natural convection -- 7.10 Heat transfer from cylinders by natural convection -- 7.11 Summary -- Problems. 8. Transient heat flow -- 8.1 Introduction -- 8.2 Lumped capacitance method; Newtonian cooling -- 8.3 Non-Newtonian cooling in semi-infinite systems -- 8.4 Non-Newtonian cooling in a one-dimensional finite systems -- 8.5 Non-Newtonian cooling in a two-dimensional finite systems -- 8.6 Solidification of metal castings -- 8.7 Summary -- Problems. 9. Heat transport by thermal radiation -- 9.1 Introduction -- 9.2 Intensity and emissive power -- 9.3 Blackbody radiation -- 9.4 Emissivity -- 9.5 Absorptivity, reflectivity, and transmissivity -- 9.6 Kirchhoff's law and the Hohlraum -- 9.7 Radiation exchange between surfaces -- 9.8 Radiation exchange between blackbodies -- 9.9 Radiation exchange between diffuse-gray surfaces -- 9.10 Electric analogy -- 9.11 Radiation shields -- 9.12 Reradiating surface -- 9.13 Heat transfer from a surface by convection and radiation -- 9.14 Summary -- Problems. 10. Mass transport by diffusion in the solid state -- 10.1 Introduction -- 10.2 Atomic diffusion as a random-walk process -- 10.3 Fick 's first law of diffusion -- 10.4 One-dimensional non-steady-state diffusion in a solid; Fick's second law of diffusion -- 10.5 Infinite diffusion couple -- 10.6 One-dimensional diffusion in a semi-infinite system involving a change of phase -- 10.7 Steady-state diffusion through a composite wall -- 10.8 Diffusion in substitutional solid solutions -- 10.9 Darken's analysis -- 10.10 Self-diffusion coefficient -- 10.11 Measurement of the interdifussion coefficient: Boltzmann-Matano analysis -- 10.12 Influence of temperature on the diffusion coefficient -- 10.13 Summary -- Problems. 11. Mass transport in fluids -- 11.1 Introduction -- 11.2 Mass and molar fluxes in a fluid -- 11.3 Equations of diffusion with convection in a binary mixture A-B -- 11.4 One-dimensional transport in a binary mixture of ideal gases -- 11.5 Equimolar counterdiffusion -- 11.6 One-dimensional steady-state diffusion of gas A through stationary gas B -- 11.7 Sublimation of a sphere into a stationary gas -- 11.8 Film model -- 11.9 Catalytic surface reactions -- 11.10 Diffusion and chemical reaction in stagnant film -- 11.11 Mass transfer at large fluxes and large concentrations -- 11.12 Influence of mass transport on heat transfer in stagnant film -- 11.13 Diffusion into a falling film of liquid -- 11.14 Diffusion and the kinetic theory of gases -- 11.15 Mass transfer coefficient and concentration boundary layer on a flat plate -- 11.16 Approximate integral method -- 11.17 Mass transfer by free convection -- 11.18 Simultaneous heat and mass transfer: evaporate cooling -- 11.19 Chemical reaction and mass transfer: mixed control -- 11.20 Dissolution of pure metal A in liquid B: mixed control -- 11.21 Summary -- Problems. 12. Condensation and boiling -- 12.1 Introduction -- 12.2 Dimensionless parameters in boiling and condensation -- 12.3 Modes of boiling -- 12.4 Pool boiling correlations -- 12.5 Summary -- Problems. Appendix A. Elementary and derived SI units and symbols -- Appendix B. Prefixes and symbols for multiples and submultiples of SI units -- Appendix C. Conversion from British and U.S. units to SI units -- Appendix D. Properties of solid metals -- Appendix E. Properties of nonmetallic solids -- Appendix F. Properties of gases at 1 Atm pressure -- Appendix G. Properties of saturated liquids -- Appendix H. Properties of liquid metals -- Recommended readings -- Answers to problems -- Index. In their classic text, Transport Phenomena, Bird, Stewart. and Lightfoot state their opinion that the subject of transport phenomena should rank along with thermodynamics, mechanics, and electromagnetism as one of the "key engineering sciences." This thought was not shared by many traditional metallurgists, and diffusion in the solid state was the only aspect of transport phenomena included in many traditional university metallurgy curricula. However, as metallurgists transformed themselves into materials scientists and engineers, and the artificial barriers between the various engineering disciplines were lowered, the materials engineers began to see the truth in the opinion of Bird, Stewart, and Lightfoot. The major difference, however, between the first and this edition is that this edition contains an additional chapter, Chapter 12, titled "Boiling and Condensation." The material presented in this chapter is particularly important in view of the current interest in Renewal Energy Resources involving such devices as windmills and solar panels. Developments in this field require a thorough familiarity with the phenomena and mechanisms of boiling and condensation. Materials Transport properties. Materials Fluid dynamics. Mass transfer. http://id.loc.gov/authorities/subjects/sh85081910 Heat Transmission. http://id.loc.gov/authorities/subjects/sh85059767 Matériaux Propriétés de transport. Matériaux Dynamique des fluides. Transfert de masse. Chaleur Transmission. heat transmission. aat SCIENCE Nanoscience. bisacsh Heat Transmission fast Mass transfer fast Thermodynamics of Materials High Temperature Kinetics Transport Phenomena Materials Processing has work: An introduction to transport phenomena in materials engineering (Text) https://id.oclc.org/worldcat/entity/E39PCFtJH93RccwBYKRdkT8Jym https://id.oclc.org/worldcat/ontology/hasWork Print version: 1606503553 9781606503553 FWS01 ZDB-4-EBA FWS_PDA_EBA https://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=501124 Volltext |
| spellingShingle | Gaskell, David R., 1940- An introduction to transport phenomena in materials engineering / List of symbols. 1. Engineering units and pressure in static fluids -- 1.1 Origins of engineering units -- 1.2 Concept of pressure -- 1.3 Measurement of pressure -- 1.4 Pressure in incompressible fluids -- 1.5 Buoyancy -- 1.6 Summary -- Problems. 2. Momentum transport and laminar flow of Newtonian fluids -- 2.1 Introduction -- 2.2 Newton's lax of viscosity -- 2.3 Conservation of momentum in steady-state flow -- 2.4 Fluid flow between two flat parallel plates -- 2.5 Fluid flow down in inclined plane -- 2.6 Fluid flow in a vertical cylindrical tube -- 2.7 Capillary flowmeter -- 2.8 Fluid flow in an annulus -- 2.9 Mean residence time -- 2.10 Calculation of viscosity from the kinetic theory of gases -- 2.11 Viscosities of liquid metals -- 2.12 Summary -- Problems. 3. Equations of continuity and conservation of momentum and fluid flow past submerged objects -- 3.1 Introduction -- 3.2 Equation of continuity -- 3.3 Conservation of momentum -- 3.4 Navier-Stokes equation for fluids of constant density and viscosity -- 3.5 Fluid flow over a horizontal flat plane -- 3.6 Approximate integral method in obtaining boundary layer thickness -- 3.7 Creeping flow past a sphere -- 3.8 Summary -- Problems. 4. Turbulent flow -- 4.1 Introduction -- 4.2 Graphical representation of fluid flow -- 4.3 Friction factor and turbulent flow in cylindrical pipes -- 4.4 Flow over a flat plate -- 4.5 Flow past a submerged sphere -- 4.6 Flow past a submerged cylinder -- 4.7 Flow through packed beds -- 4.8 Fluidized beds -- 4.9 Summary -- Problems. 5. Mechanical energy balance and its application to fluid flow -- 5.1 Introduction -- 5.2 Bernoulli's equation -- 5.3 Friction loss, Ef -- 5.4 Influence of bends, fittings, and changes in the pipe radius -- 5.5 Concept of head -- 5.6 Fluid flow in an open channel -- 5.7 Drainage from a vessel -- 5.8 Emptying a vessel by discharge through an orifice -- 5.9 Drainage of a vessel using a drainage tube -- 5.10 Emptying a vessel by drainage through a drainage tube -- 5.11 Bernoulli equation for flow of compressible fluids -- 5.12 Pilot tube -- 5.13 Orifice plate -- 5.14 Summary -- Problems. 6. Transport of heat by conduction -- 6.1 Introduction -- 6.2 Fourier's law and Newton's law -- 6.3 Conduction -- 6.4 Conduction in heat sources -- 6.5 Thermal conductivity and the kinetic theory of gases -- 6.6 General heat conduction equation -- 6.7 Conduction of heat at steady state in two dimensions -- 6.8 Summary -- Problems. 7. Transport of heat by convection -- 7.1 Introduction -- 7.2 Heat transfer by forced convection from a horizontal flat plate at a uniform constant temperature -- 7.3 Heat transfer from a horizontal flat plate with uniform heat flux along the plate -- 7.4 Heat transfer during fluid flow in cylindrical pipes -- 7.5 Energy balance in heat transfer by convection between a cylindrical pipe and a flowing fluid -- 7.6 Heat transfer by forced convection from horizontal cylinders -- 7.7 Heat transfer by forced convection from a sphere -- 7.8 General energy equation -- 7.9 Heat transfer from a vertical plate by natural convection -- 7.10 Heat transfer from cylinders by natural convection -- 7.11 Summary -- Problems. 8. Transient heat flow -- 8.1 Introduction -- 8.2 Lumped capacitance method; Newtonian cooling -- 8.3 Non-Newtonian cooling in semi-infinite systems -- 8.4 Non-Newtonian cooling in a one-dimensional finite systems -- 8.5 Non-Newtonian cooling in a two-dimensional finite systems -- 8.6 Solidification of metal castings -- 8.7 Summary -- Problems. 9. Heat transport by thermal radiation -- 9.1 Introduction -- 9.2 Intensity and emissive power -- 9.3 Blackbody radiation -- 9.4 Emissivity -- 9.5 Absorptivity, reflectivity, and transmissivity -- 9.6 Kirchhoff's law and the Hohlraum -- 9.7 Radiation exchange between surfaces -- 9.8 Radiation exchange between blackbodies -- 9.9 Radiation exchange between diffuse-gray surfaces -- 9.10 Electric analogy -- 9.11 Radiation shields -- 9.12 Reradiating surface -- 9.13 Heat transfer from a surface by convection and radiation -- 9.14 Summary -- Problems. 10. Mass transport by diffusion in the solid state -- 10.1 Introduction -- 10.2 Atomic diffusion as a random-walk process -- 10.3 Fick 's first law of diffusion -- 10.4 One-dimensional non-steady-state diffusion in a solid; Fick's second law of diffusion -- 10.5 Infinite diffusion couple -- 10.6 One-dimensional diffusion in a semi-infinite system involving a change of phase -- 10.7 Steady-state diffusion through a composite wall -- 10.8 Diffusion in substitutional solid solutions -- 10.9 Darken's analysis -- 10.10 Self-diffusion coefficient -- 10.11 Measurement of the interdifussion coefficient: Boltzmann-Matano analysis -- 10.12 Influence of temperature on the diffusion coefficient -- 10.13 Summary -- Problems. 11. Mass transport in fluids -- 11.1 Introduction -- 11.2 Mass and molar fluxes in a fluid -- 11.3 Equations of diffusion with convection in a binary mixture A-B -- 11.4 One-dimensional transport in a binary mixture of ideal gases -- 11.5 Equimolar counterdiffusion -- 11.6 One-dimensional steady-state diffusion of gas A through stationary gas B -- 11.7 Sublimation of a sphere into a stationary gas -- 11.8 Film model -- 11.9 Catalytic surface reactions -- 11.10 Diffusion and chemical reaction in stagnant film -- 11.11 Mass transfer at large fluxes and large concentrations -- 11.12 Influence of mass transport on heat transfer in stagnant film -- 11.13 Diffusion into a falling film of liquid -- 11.14 Diffusion and the kinetic theory of gases -- 11.15 Mass transfer coefficient and concentration boundary layer on a flat plate -- 11.16 Approximate integral method -- 11.17 Mass transfer by free convection -- 11.18 Simultaneous heat and mass transfer: evaporate cooling -- 11.19 Chemical reaction and mass transfer: mixed control -- 11.20 Dissolution of pure metal A in liquid B: mixed control -- 11.21 Summary -- Problems. 12. Condensation and boiling -- 12.1 Introduction -- 12.2 Dimensionless parameters in boiling and condensation -- 12.3 Modes of boiling -- 12.4 Pool boiling correlations -- 12.5 Summary -- Problems. Appendix A. Elementary and derived SI units and symbols -- Appendix B. Prefixes and symbols for multiples and submultiples of SI units -- Appendix C. Conversion from British and U.S. units to SI units -- Appendix D. Properties of solid metals -- Appendix E. Properties of nonmetallic solids -- Appendix F. Properties of gases at 1 Atm pressure -- Appendix G. Properties of saturated liquids -- Appendix H. Properties of liquid metals -- Recommended readings -- Answers to problems -- Index. Materials Transport properties. Materials Fluid dynamics. Mass transfer. http://id.loc.gov/authorities/subjects/sh85081910 Heat Transmission. http://id.loc.gov/authorities/subjects/sh85059767 Matériaux Propriétés de transport. Matériaux Dynamique des fluides. Transfert de masse. Chaleur Transmission. heat transmission. aat SCIENCE Nanoscience. bisacsh Heat Transmission fast Mass transfer fast |
| subject_GND | http://id.loc.gov/authorities/subjects/sh85081910 http://id.loc.gov/authorities/subjects/sh85059767 |
| title | An introduction to transport phenomena in materials engineering / |
| title_auth | An introduction to transport phenomena in materials engineering / |
| title_exact_search | An introduction to transport phenomena in materials engineering / |
| title_full | An introduction to transport phenomena in materials engineering / David R. Gaskell. |
| title_fullStr | An introduction to transport phenomena in materials engineering / David R. Gaskell. |
| title_full_unstemmed | An introduction to transport phenomena in materials engineering / David R. Gaskell. |
| title_short | An introduction to transport phenomena in materials engineering / |
| title_sort | introduction to transport phenomena in materials engineering |
| topic | Materials Transport properties. Materials Fluid dynamics. Mass transfer. http://id.loc.gov/authorities/subjects/sh85081910 Heat Transmission. http://id.loc.gov/authorities/subjects/sh85059767 Matériaux Propriétés de transport. Matériaux Dynamique des fluides. Transfert de masse. Chaleur Transmission. heat transmission. aat SCIENCE Nanoscience. bisacsh Heat Transmission fast Mass transfer fast |
| topic_facet | Materials Transport properties. Materials Fluid dynamics. Mass transfer. Heat Transmission. Matériaux Propriétés de transport. Matériaux Dynamique des fluides. Transfert de masse. Chaleur Transmission. heat transmission. SCIENCE Nanoscience. Heat Transmission Mass transfer |
| url | https://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=501124 |
| work_keys_str_mv | AT gaskelldavidr anintroductiontotransportphenomenainmaterialsengineering AT gaskelldavidr introductiontotransportphenomenainmaterialsengineering |