Mixing in single screw extrusion /:
A lot of plastics products are extruded and most of those products contain additives, which mean that the plastic must be mixed at some point. Mixing is generally done with a twin-screw extruder, and the single-screw extruder, which is used in product production, is generally overlooked as a device...
Gespeichert in:
| 1. Verfasser: | |
|---|---|
| Körperschaft: | |
| Format: | Elektronisch E-Book |
| Sprache: | English |
| Veröffentlicht: |
Shrewsbury, U.K. :
ISmithers,
©2009.
|
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Zusammenfassung: | A lot of plastics products are extruded and most of those products contain additives, which mean that the plastic must be mixed at some point. Mixing is generally done with a twin-screw extruder, and the single-screw extruder, which is used in product production, is generally overlooked as a device for mixing. This reference handbook, written by a former Principal Consultant at Smithers Rapra, and the inventor of the cavity transfer mixer, redresses the balance. This handbook is a must-have practical guide to the subject of single-screw extrusion. Avoiding mathematical theory, except when absolutely necessary, this authoritative handbook empowers the reader to achieving good results with their plastic mixing. Mixing in Single Screw Extrusion will be a valuable resource to all involved in the art of plastic extrusion. --Book Jacket. |
| Beschreibung: | 1 online resource (viii, 286 pages) : illustrations |
| Bibliographie: | Includes bibliographical references and index. |
| ISBN: | 9781847351319 184735131X 9781613444276 1613444273 |
Internformat
MARC
| LEADER | 00000cam a2200000 a 4500 | ||
|---|---|---|---|
| 001 | ZDB-4-EBA-ocn436924723 | ||
| 003 | OCoLC | ||
| 005 | 20241004212047.0 | ||
| 006 | m o d | ||
| 007 | cr cnu---unuuu | ||
| 008 | 090917s2009 enka ob 001 0 eng d | ||
| 040 | |a N$T |b eng |e pn |c N$T |d OCLCQ |d E7B |d EBLCP |d OCLCQ |d KNOVL |d OCLCQ |d ZCU |d DEBSZ |d KNOVL |d OCLCO |d OCLCQ |d COO |d OCLCF |d KNOVL |d YDXCP |d OCLCQ |d STF |d INTCL |d JBG |d OCLCQ |d AGLDB |d OCLCQ |d MOR |d PIFAG |d MERUC |d OCLCQ |d U3W |d BUF |d WRM |d OCLCQ |d VTS |d CEF |d NRAMU |d INT |d OCLCQ |d WYU |d OCLCQ |d AU@ |d M8D |d OCLCQ |d K6U |d OCLCO |d OCLCQ |d OCLCO |d OCLCL | ||
| 019 | |a 646813888 |a 764520215 |a 961570192 |a 962630186 |a 988527263 |a 991913288 |a 1037906846 |a 1038644652 |a 1045501001 |a 1062915199 | ||
| 020 | |a 9781847351319 |q (electronic bk.) | ||
| 020 | |a 184735131X |q (electronic bk.) | ||
| 020 | |a 9781613444276 |q (electronic bk.) | ||
| 020 | |a 1613444273 |q (electronic bk.) | ||
| 020 | |z 1847351298 |q (pbk.) | ||
| 020 | |z 1847351301 |q (hbk.) | ||
| 020 | |z 9781847351296 |q (pbk.) | ||
| 020 | |z 9781847351302 |q (hbk.) | ||
| 035 | |a (OCoLC)436924723 |z (OCoLC)646813888 |z (OCoLC)764520215 |z (OCoLC)961570192 |z (OCoLC)962630186 |z (OCoLC)988527263 |z (OCoLC)991913288 |z (OCoLC)1037906846 |z (OCoLC)1038644652 |z (OCoLC)1045501001 |z (OCoLC)1062915199 | ||
| 050 | 4 | |a TP1175.E9 |b G35 2009eb | |
| 072 | 7 | |a TEC |x 009010 |2 bisacsh | |
| 082 | 7 | |a 668.413 |2 22 | |
| 049 | |a MAIN | ||
| 100 | 1 | |a Gale, Martin. | |
| 245 | 1 | 0 | |a Mixing in single screw extrusion / |c Martin Gale. |
| 260 | |a Shrewsbury, U.K. : |b ISmithers, |c ©2009. | ||
| 300 | |a 1 online resource (viii, 286 pages) : |b illustrations | ||
| 336 | |a text |b txt |2 rdacontent | ||
| 337 | |a computer |b c |2 rdamedia | ||
| 338 | |a online resource |b cr |2 rdacarrier | ||
| 504 | |a Includes bibliographical references and index. | ||
| 588 | 0 | |a Print version record. | |
| 505 | 0 | 0 | |g Machine generated contents note: |g 1. |t Need for Good Mixing in Single Screw Extrusion -- |g 1.2. |t Examples of Mixing Problems -- |g 1.2.1. |t Polyethylene Pipes and Cables -- |g 1.2.2. |t Blow Moulded Bottles -- |g 1.2.3. |t Chalk Filled Polypropylene Pipe -- |g 1.2.4. |t Blown Film -- |g 1.2.5. |t Industrial Blow Mouldings -- |g 1.2.6. |t Production Scrap Re-use -- |g 1.2.7. |t Agglomerates and Gels in Thin Extrusions -- |g 1.2.8. |t Transparent Polycaprolactone/SAN Blends -- |g 1.2.9. |t Decorative Wood Grain Effects -- |t References -- |g 2. |t Dispersive and Distributive Mixing -- |g 2.1. |t Definitions and Illustrations -- |g 2.2. |t Dispersive Mixing -- |g 2.2.1. |t Dispersive Mixing Mechanisms -- |g 2.2.2. |t Dispersive Mixing of Additive Powders Such as Pigments -- |g 2.3. |t Distributive Mixing -- |g 2.3.1. |t Laminar Shear Flow Mixing -- |g 2.3.2. |t Measurement of Distributive Mixing Achieved by Laminar Shearing -- |g 2.3.3. |t Limitations of Lamina Flow Mixing -- |g 2.3.4. |t Eliminating Laminar Striations -- |t References -- |g 3. |t Measurement of Mixing -- |g 3.1. |t Need for Measurement of Mixing -- |g 3.2. |t Striation Thickness Measurement -- |g 3.3. |t Agglomerate Measurement -- |g 3.3.1. |t Microscopy Examination of Thin Samples -- |g 3.3.2. |t Agglomerate Count for Blown Film -- |g 3.3.3. |t Screen Pack Filtration Test -- |g 3.4. |t Influences of Mixing on Product Properties -- |g 3.5. |t Preparation of Thin Sections for Optical Microscopy Assessment -- |t References -- |g 4. |t Single Screw Extruder Stages: Effects on Mixing -- |t References -- |g 5. |t Pellet Handling: A Source of Variable Composition -- |g 5.1. |t Introduction -- |g 5.2. |t Hopper Design -- |g 5.2.1. |t Mass Flow Hopper -- |g 5.2.2. |t Non-mass Flow Hopper -- |g 5.2.3. |t Round Hoppers -- |g 5.2.4. |t Square and Rectangular Hoppers -- |g 5.2.5. |t Ledges and Corners -- |g 5.3. |t Composition Variations -- |g 5.3.1. |t Example 1 -- |g 5.3.2. |t Example 2 -- |g 5.3.3. |t Example 3 -- |g 5.3.4. |t Other Systems -- |g 5.4. |t Measurement of Particulate Properties -- |g 5.4.1. |t Hopper Flow Tests. |
| 520 | |a A lot of plastics products are extruded and most of those products contain additives, which mean that the plastic must be mixed at some point. Mixing is generally done with a twin-screw extruder, and the single-screw extruder, which is used in product production, is generally overlooked as a device for mixing. This reference handbook, written by a former Principal Consultant at Smithers Rapra, and the inventor of the cavity transfer mixer, redresses the balance. | ||
| 520 | |a This handbook is a must-have practical guide to the subject of single-screw extrusion. Avoiding mathematical theory, except when absolutely necessary, this authoritative handbook empowers the reader to achieving good results with their plastic mixing. Mixing in Single Screw Extrusion will be a valuable resource to all involved in the art of plastic extrusion. --Book Jacket. | ||
| 650 | 0 | |a Plastics |x Extrusion. |0 http://id.loc.gov/authorities/subjects/sh85103166 | |
| 650 | 6 | |a Matières plastiques |x Extrusion. | |
| 650 | 7 | |a TECHNOLOGY & ENGINEERING |x Chemical & Biochemical. |2 bisacsh | |
| 650 | 7 | |a Plastics |x Extrusion |2 fast | |
| 710 | 2 | |a Rapra Technology Limited. |0 http://id.loc.gov/authorities/names/n85003082 | |
| 758 | |i has work: |a Mixing in single screw extrusion (Text) |1 https://id.oclc.org/worldcat/entity/E39PCXQkHk8gFVMF8tfBYVvd33 |4 https://id.oclc.org/worldcat/ontology/hasWork | ||
| 776 | 0 | 8 | |i Print version: |a Gale, Martin. |t Mixing in single screw extrusion. |d Shrewsbury, U.K. : ISmithers, ©2009 |z 1847351301 |z 9781847351302 |w (OCoLC)426030709 |
| 856 | 4 | 0 | |l FWS01 |p ZDB-4-EBA |q FWS_PDA_EBA |u https://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=288183 |3 Volltext |
| 938 | |a ProQuest Ebook Central |b EBLB |n EBL485273 | ||
| 938 | |a EBSCOhost |b EBSC |n 288183 | ||
| 938 | |a YBP Library Services |b YANK |n 3072463 | ||
| 994 | |a 92 |b GEBAY | ||
| 912 | |a ZDB-4-EBA | ||
| 049 | |a DE-863 | ||
Datensatz im Suchindex
| DE-BY-FWS_katkey | ZDB-4-EBA-ocn436924723 |
|---|---|
| _version_ | 1816881698335358976 |
| adam_text | |
| any_adam_object | |
| author | Gale, Martin |
| author_corporate | Rapra Technology Limited |
| author_corporate_role | |
| author_facet | Gale, Martin Rapra Technology Limited |
| author_role | |
| author_sort | Gale, Martin |
| author_variant | m g mg |
| building | Verbundindex |
| bvnumber | localFWS |
| callnumber-first | T - Technology |
| callnumber-label | TP1175 |
| callnumber-raw | TP1175.E9 G35 2009eb |
| callnumber-search | TP1175.E9 G35 2009eb |
| callnumber-sort | TP 41175 E9 G35 42009EB |
| callnumber-subject | TP - Chemical Technology |
| collection | ZDB-4-EBA |
| contents | Need for Good Mixing in Single Screw Extrusion -- Examples of Mixing Problems -- Polyethylene Pipes and Cables -- Blow Moulded Bottles -- Chalk Filled Polypropylene Pipe -- Blown Film -- Industrial Blow Mouldings -- Production Scrap Re-use -- Agglomerates and Gels in Thin Extrusions -- Transparent Polycaprolactone/SAN Blends -- Decorative Wood Grain Effects -- References -- Dispersive and Distributive Mixing -- Definitions and Illustrations -- Dispersive Mixing -- Dispersive Mixing Mechanisms -- Dispersive Mixing of Additive Powders Such as Pigments -- Distributive Mixing -- Laminar Shear Flow Mixing -- Measurement of Distributive Mixing Achieved by Laminar Shearing -- Limitations of Lamina Flow Mixing -- Eliminating Laminar Striations -- Measurement of Mixing -- Need for Measurement of Mixing -- Striation Thickness Measurement -- Agglomerate Measurement -- Microscopy Examination of Thin Samples -- Agglomerate Count for Blown Film -- Screen Pack Filtration Test -- Influences of Mixing on Product Properties -- Preparation of Thin Sections for Optical Microscopy Assessment -- Single Screw Extruder Stages: Effects on Mixing -- Pellet Handling: A Source of Variable Composition -- Introduction -- Hopper Design -- Mass Flow Hopper -- Non-mass Flow Hopper -- Round Hoppers -- Square and Rectangular Hoppers -- Ledges and Corners -- Composition Variations -- Example 1 -- Example 2 -- Example 3 -- Other Systems -- Measurement of Particulate Properties -- Hopper Flow Tests. |
| ctrlnum | (OCoLC)436924723 |
| dewey-full | 668.413 |
| dewey-hundreds | 600 - Technology (Applied sciences) |
| dewey-ones | 668 - Technology of other organic products |
| dewey-raw | 668.413 |
| dewey-search | 668.413 |
| dewey-sort | 3668.413 |
| dewey-tens | 660 - Chemical engineering |
| discipline | Chemie / Pharmazie |
| format | Electronic eBook |
| fullrecord | <?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>05557cam a2200565 a 4500</leader><controlfield tag="001">ZDB-4-EBA-ocn436924723</controlfield><controlfield tag="003">OCoLC</controlfield><controlfield tag="005">20241004212047.0</controlfield><controlfield tag="006">m o d </controlfield><controlfield tag="007">cr cnu---unuuu</controlfield><controlfield tag="008">090917s2009 enka ob 001 0 eng d</controlfield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">N$T</subfield><subfield code="b">eng</subfield><subfield code="e">pn</subfield><subfield code="c">N$T</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">E7B</subfield><subfield code="d">EBLCP</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">KNOVL</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">ZCU</subfield><subfield code="d">DEBSZ</subfield><subfield code="d">KNOVL</subfield><subfield code="d">OCLCO</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">COO</subfield><subfield code="d">OCLCF</subfield><subfield code="d">KNOVL</subfield><subfield code="d">YDXCP</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">STF</subfield><subfield code="d">INTCL</subfield><subfield code="d">JBG</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">AGLDB</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">MOR</subfield><subfield code="d">PIFAG</subfield><subfield code="d">MERUC</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">U3W</subfield><subfield code="d">BUF</subfield><subfield code="d">WRM</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">VTS</subfield><subfield code="d">CEF</subfield><subfield code="d">NRAMU</subfield><subfield code="d">INT</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">WYU</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">AU@</subfield><subfield code="d">M8D</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">K6U</subfield><subfield code="d">OCLCO</subfield><subfield code="d">OCLCQ</subfield><subfield code="d">OCLCO</subfield><subfield code="d">OCLCL</subfield></datafield><datafield tag="019" ind1=" " ind2=" "><subfield code="a">646813888</subfield><subfield code="a">764520215</subfield><subfield code="a">961570192</subfield><subfield code="a">962630186</subfield><subfield code="a">988527263</subfield><subfield code="a">991913288</subfield><subfield code="a">1037906846</subfield><subfield code="a">1038644652</subfield><subfield code="a">1045501001</subfield><subfield code="a">1062915199</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9781847351319</subfield><subfield code="q">(electronic bk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">184735131X</subfield><subfield code="q">(electronic bk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9781613444276</subfield><subfield code="q">(electronic bk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">1613444273</subfield><subfield code="q">(electronic bk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="z">1847351298</subfield><subfield code="q">(pbk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="z">1847351301</subfield><subfield code="q">(hbk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="z">9781847351296</subfield><subfield code="q">(pbk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="z">9781847351302</subfield><subfield code="q">(hbk.)</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(OCoLC)436924723</subfield><subfield code="z">(OCoLC)646813888</subfield><subfield code="z">(OCoLC)764520215</subfield><subfield code="z">(OCoLC)961570192</subfield><subfield code="z">(OCoLC)962630186</subfield><subfield code="z">(OCoLC)988527263</subfield><subfield code="z">(OCoLC)991913288</subfield><subfield code="z">(OCoLC)1037906846</subfield><subfield code="z">(OCoLC)1038644652</subfield><subfield code="z">(OCoLC)1045501001</subfield><subfield code="z">(OCoLC)1062915199</subfield></datafield><datafield tag="050" ind1=" " ind2="4"><subfield code="a">TP1175.E9</subfield><subfield code="b">G35 2009eb</subfield></datafield><datafield tag="072" ind1=" " ind2="7"><subfield code="a">TEC</subfield><subfield code="x">009010</subfield><subfield code="2">bisacsh</subfield></datafield><datafield tag="082" ind1="7" ind2=" "><subfield code="a">668.413</subfield><subfield code="2">22</subfield></datafield><datafield tag="049" ind1=" " ind2=" "><subfield code="a">MAIN</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Gale, Martin.</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Mixing in single screw extrusion /</subfield><subfield code="c">Martin Gale.</subfield></datafield><datafield tag="260" ind1=" " ind2=" "><subfield code="a">Shrewsbury, U.K. :</subfield><subfield code="b">ISmithers,</subfield><subfield code="c">©2009.</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">1 online resource (viii, 286 pages) :</subfield><subfield code="b">illustrations</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">computer</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">online resource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="504" ind1=" " ind2=" "><subfield code="a">Includes bibliographical references and index.</subfield></datafield><datafield tag="588" ind1="0" ind2=" "><subfield code="a">Print version record.</subfield></datafield><datafield tag="505" ind1="0" ind2="0"><subfield code="g">Machine generated contents note:</subfield><subfield code="g">1.</subfield><subfield code="t">Need for Good Mixing in Single Screw Extrusion --</subfield><subfield code="g">1.2.</subfield><subfield code="t">Examples of Mixing Problems --</subfield><subfield code="g">1.2.1.</subfield><subfield code="t">Polyethylene Pipes and Cables --</subfield><subfield code="g">1.2.2.</subfield><subfield code="t">Blow Moulded Bottles --</subfield><subfield code="g">1.2.3.</subfield><subfield code="t">Chalk Filled Polypropylene Pipe --</subfield><subfield code="g">1.2.4.</subfield><subfield code="t">Blown Film --</subfield><subfield code="g">1.2.5.</subfield><subfield code="t">Industrial Blow Mouldings --</subfield><subfield code="g">1.2.6.</subfield><subfield code="t">Production Scrap Re-use --</subfield><subfield code="g">1.2.7.</subfield><subfield code="t">Agglomerates and Gels in Thin Extrusions --</subfield><subfield code="g">1.2.8.</subfield><subfield code="t">Transparent Polycaprolactone/SAN Blends --</subfield><subfield code="g">1.2.9.</subfield><subfield code="t">Decorative Wood Grain Effects --</subfield><subfield code="t">References --</subfield><subfield code="g">2.</subfield><subfield code="t">Dispersive and Distributive Mixing --</subfield><subfield code="g">2.1.</subfield><subfield code="t">Definitions and Illustrations --</subfield><subfield code="g">2.2.</subfield><subfield code="t">Dispersive Mixing --</subfield><subfield code="g">2.2.1.</subfield><subfield code="t">Dispersive Mixing Mechanisms --</subfield><subfield code="g">2.2.2.</subfield><subfield code="t">Dispersive Mixing of Additive Powders Such as Pigments --</subfield><subfield code="g">2.3.</subfield><subfield code="t">Distributive Mixing --</subfield><subfield code="g">2.3.1.</subfield><subfield code="t">Laminar Shear Flow Mixing --</subfield><subfield code="g">2.3.2.</subfield><subfield code="t">Measurement of Distributive Mixing Achieved by Laminar Shearing --</subfield><subfield code="g">2.3.3.</subfield><subfield code="t">Limitations of Lamina Flow Mixing --</subfield><subfield code="g">2.3.4.</subfield><subfield code="t">Eliminating Laminar Striations --</subfield><subfield code="t">References --</subfield><subfield code="g">3.</subfield><subfield code="t">Measurement of Mixing --</subfield><subfield code="g">3.1.</subfield><subfield code="t">Need for Measurement of Mixing --</subfield><subfield code="g">3.2.</subfield><subfield code="t">Striation Thickness Measurement --</subfield><subfield code="g">3.3.</subfield><subfield code="t">Agglomerate Measurement --</subfield><subfield code="g">3.3.1.</subfield><subfield code="t">Microscopy Examination of Thin Samples --</subfield><subfield code="g">3.3.2.</subfield><subfield code="t">Agglomerate Count for Blown Film --</subfield><subfield code="g">3.3.3.</subfield><subfield code="t">Screen Pack Filtration Test --</subfield><subfield code="g">3.4.</subfield><subfield code="t">Influences of Mixing on Product Properties --</subfield><subfield code="g">3.5.</subfield><subfield code="t">Preparation of Thin Sections for Optical Microscopy Assessment --</subfield><subfield code="t">References --</subfield><subfield code="g">4.</subfield><subfield code="t">Single Screw Extruder Stages: Effects on Mixing --</subfield><subfield code="t">References --</subfield><subfield code="g">5.</subfield><subfield code="t">Pellet Handling: A Source of Variable Composition --</subfield><subfield code="g">5.1.</subfield><subfield code="t">Introduction --</subfield><subfield code="g">5.2.</subfield><subfield code="t">Hopper Design --</subfield><subfield code="g">5.2.1.</subfield><subfield code="t">Mass Flow Hopper --</subfield><subfield code="g">5.2.2.</subfield><subfield code="t">Non-mass Flow Hopper --</subfield><subfield code="g">5.2.3.</subfield><subfield code="t">Round Hoppers --</subfield><subfield code="g">5.2.4.</subfield><subfield code="t">Square and Rectangular Hoppers --</subfield><subfield code="g">5.2.5.</subfield><subfield code="t">Ledges and Corners --</subfield><subfield code="g">5.3.</subfield><subfield code="t">Composition Variations --</subfield><subfield code="g">5.3.1.</subfield><subfield code="t">Example 1 --</subfield><subfield code="g">5.3.2.</subfield><subfield code="t">Example 2 --</subfield><subfield code="g">5.3.3.</subfield><subfield code="t">Example 3 --</subfield><subfield code="g">5.3.4.</subfield><subfield code="t">Other Systems --</subfield><subfield code="g">5.4.</subfield><subfield code="t">Measurement of Particulate Properties --</subfield><subfield code="g">5.4.1.</subfield><subfield code="t">Hopper Flow Tests.</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">A lot of plastics products are extruded and most of those products contain additives, which mean that the plastic must be mixed at some point. Mixing is generally done with a twin-screw extruder, and the single-screw extruder, which is used in product production, is generally overlooked as a device for mixing. This reference handbook, written by a former Principal Consultant at Smithers Rapra, and the inventor of the cavity transfer mixer, redresses the balance.</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">This handbook is a must-have practical guide to the subject of single-screw extrusion. Avoiding mathematical theory, except when absolutely necessary, this authoritative handbook empowers the reader to achieving good results with their plastic mixing. Mixing in Single Screw Extrusion will be a valuable resource to all involved in the art of plastic extrusion. --Book Jacket.</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Plastics</subfield><subfield code="x">Extrusion.</subfield><subfield code="0">http://id.loc.gov/authorities/subjects/sh85103166</subfield></datafield><datafield tag="650" ind1=" " ind2="6"><subfield code="a">Matières plastiques</subfield><subfield code="x">Extrusion.</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">TECHNOLOGY & ENGINEERING</subfield><subfield code="x">Chemical & Biochemical.</subfield><subfield code="2">bisacsh</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Plastics</subfield><subfield code="x">Extrusion</subfield><subfield code="2">fast</subfield></datafield><datafield tag="710" ind1="2" ind2=" "><subfield code="a">Rapra Technology Limited.</subfield><subfield code="0">http://id.loc.gov/authorities/names/n85003082</subfield></datafield><datafield tag="758" ind1=" " ind2=" "><subfield code="i">has work:</subfield><subfield code="a">Mixing in single screw extrusion (Text)</subfield><subfield code="1">https://id.oclc.org/worldcat/entity/E39PCXQkHk8gFVMF8tfBYVvd33</subfield><subfield code="4">https://id.oclc.org/worldcat/ontology/hasWork</subfield></datafield><datafield tag="776" ind1="0" ind2="8"><subfield code="i">Print version:</subfield><subfield code="a">Gale, Martin.</subfield><subfield code="t">Mixing in single screw extrusion.</subfield><subfield code="d">Shrewsbury, U.K. : ISmithers, ©2009</subfield><subfield code="z">1847351301</subfield><subfield code="z">9781847351302</subfield><subfield code="w">(OCoLC)426030709</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="l">FWS01</subfield><subfield code="p">ZDB-4-EBA</subfield><subfield code="q">FWS_PDA_EBA</subfield><subfield code="u">https://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=288183</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">ProQuest Ebook Central</subfield><subfield code="b">EBLB</subfield><subfield code="n">EBL485273</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">EBSCOhost</subfield><subfield code="b">EBSC</subfield><subfield code="n">288183</subfield></datafield><datafield tag="938" ind1=" " ind2=" "><subfield code="a">YBP Library Services</subfield><subfield code="b">YANK</subfield><subfield code="n">3072463</subfield></datafield><datafield tag="994" ind1=" " ind2=" "><subfield code="a">92</subfield><subfield code="b">GEBAY</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ZDB-4-EBA</subfield></datafield><datafield tag="049" ind1=" " ind2=" "><subfield code="a">DE-863</subfield></datafield></record></collection> |
| id | ZDB-4-EBA-ocn436924723 |
| illustrated | Illustrated |
| indexdate | 2024-11-27T13:16:51Z |
| institution | BVB |
| institution_GND | http://id.loc.gov/authorities/names/n85003082 |
| isbn | 9781847351319 184735131X 9781613444276 1613444273 |
| language | English |
| oclc_num | 436924723 |
| open_access_boolean | |
| owner | MAIN DE-863 DE-BY-FWS |
| owner_facet | MAIN DE-863 DE-BY-FWS |
| physical | 1 online resource (viii, 286 pages) : illustrations |
| psigel | ZDB-4-EBA |
| publishDate | 2009 |
| publishDateSearch | 2009 |
| publishDateSort | 2009 |
| publisher | ISmithers, |
| record_format | marc |
| spelling | Gale, Martin. Mixing in single screw extrusion / Martin Gale. Shrewsbury, U.K. : ISmithers, ©2009. 1 online resource (viii, 286 pages) : illustrations text txt rdacontent computer c rdamedia online resource cr rdacarrier Includes bibliographical references and index. Print version record. Machine generated contents note: 1. Need for Good Mixing in Single Screw Extrusion -- 1.2. Examples of Mixing Problems -- 1.2.1. Polyethylene Pipes and Cables -- 1.2.2. Blow Moulded Bottles -- 1.2.3. Chalk Filled Polypropylene Pipe -- 1.2.4. Blown Film -- 1.2.5. Industrial Blow Mouldings -- 1.2.6. Production Scrap Re-use -- 1.2.7. Agglomerates and Gels in Thin Extrusions -- 1.2.8. Transparent Polycaprolactone/SAN Blends -- 1.2.9. Decorative Wood Grain Effects -- References -- 2. Dispersive and Distributive Mixing -- 2.1. Definitions and Illustrations -- 2.2. Dispersive Mixing -- 2.2.1. Dispersive Mixing Mechanisms -- 2.2.2. Dispersive Mixing of Additive Powders Such as Pigments -- 2.3. Distributive Mixing -- 2.3.1. Laminar Shear Flow Mixing -- 2.3.2. Measurement of Distributive Mixing Achieved by Laminar Shearing -- 2.3.3. Limitations of Lamina Flow Mixing -- 2.3.4. Eliminating Laminar Striations -- References -- 3. Measurement of Mixing -- 3.1. Need for Measurement of Mixing -- 3.2. Striation Thickness Measurement -- 3.3. Agglomerate Measurement -- 3.3.1. Microscopy Examination of Thin Samples -- 3.3.2. Agglomerate Count for Blown Film -- 3.3.3. Screen Pack Filtration Test -- 3.4. Influences of Mixing on Product Properties -- 3.5. Preparation of Thin Sections for Optical Microscopy Assessment -- References -- 4. Single Screw Extruder Stages: Effects on Mixing -- References -- 5. Pellet Handling: A Source of Variable Composition -- 5.1. Introduction -- 5.2. Hopper Design -- 5.2.1. Mass Flow Hopper -- 5.2.2. Non-mass Flow Hopper -- 5.2.3. Round Hoppers -- 5.2.4. Square and Rectangular Hoppers -- 5.2.5. Ledges and Corners -- 5.3. Composition Variations -- 5.3.1. Example 1 -- 5.3.2. Example 2 -- 5.3.3. Example 3 -- 5.3.4. Other Systems -- 5.4. Measurement of Particulate Properties -- 5.4.1. Hopper Flow Tests. A lot of plastics products are extruded and most of those products contain additives, which mean that the plastic must be mixed at some point. Mixing is generally done with a twin-screw extruder, and the single-screw extruder, which is used in product production, is generally overlooked as a device for mixing. This reference handbook, written by a former Principal Consultant at Smithers Rapra, and the inventor of the cavity transfer mixer, redresses the balance. This handbook is a must-have practical guide to the subject of single-screw extrusion. Avoiding mathematical theory, except when absolutely necessary, this authoritative handbook empowers the reader to achieving good results with their plastic mixing. Mixing in Single Screw Extrusion will be a valuable resource to all involved in the art of plastic extrusion. --Book Jacket. Plastics Extrusion. http://id.loc.gov/authorities/subjects/sh85103166 Matières plastiques Extrusion. TECHNOLOGY & ENGINEERING Chemical & Biochemical. bisacsh Plastics Extrusion fast Rapra Technology Limited. http://id.loc.gov/authorities/names/n85003082 has work: Mixing in single screw extrusion (Text) https://id.oclc.org/worldcat/entity/E39PCXQkHk8gFVMF8tfBYVvd33 https://id.oclc.org/worldcat/ontology/hasWork Print version: Gale, Martin. Mixing in single screw extrusion. Shrewsbury, U.K. : ISmithers, ©2009 1847351301 9781847351302 (OCoLC)426030709 FWS01 ZDB-4-EBA FWS_PDA_EBA https://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=288183 Volltext |
| spellingShingle | Gale, Martin Mixing in single screw extrusion / Need for Good Mixing in Single Screw Extrusion -- Examples of Mixing Problems -- Polyethylene Pipes and Cables -- Blow Moulded Bottles -- Chalk Filled Polypropylene Pipe -- Blown Film -- Industrial Blow Mouldings -- Production Scrap Re-use -- Agglomerates and Gels in Thin Extrusions -- Transparent Polycaprolactone/SAN Blends -- Decorative Wood Grain Effects -- References -- Dispersive and Distributive Mixing -- Definitions and Illustrations -- Dispersive Mixing -- Dispersive Mixing Mechanisms -- Dispersive Mixing of Additive Powders Such as Pigments -- Distributive Mixing -- Laminar Shear Flow Mixing -- Measurement of Distributive Mixing Achieved by Laminar Shearing -- Limitations of Lamina Flow Mixing -- Eliminating Laminar Striations -- Measurement of Mixing -- Need for Measurement of Mixing -- Striation Thickness Measurement -- Agglomerate Measurement -- Microscopy Examination of Thin Samples -- Agglomerate Count for Blown Film -- Screen Pack Filtration Test -- Influences of Mixing on Product Properties -- Preparation of Thin Sections for Optical Microscopy Assessment -- Single Screw Extruder Stages: Effects on Mixing -- Pellet Handling: A Source of Variable Composition -- Introduction -- Hopper Design -- Mass Flow Hopper -- Non-mass Flow Hopper -- Round Hoppers -- Square and Rectangular Hoppers -- Ledges and Corners -- Composition Variations -- Example 1 -- Example 2 -- Example 3 -- Other Systems -- Measurement of Particulate Properties -- Hopper Flow Tests. Plastics Extrusion. http://id.loc.gov/authorities/subjects/sh85103166 Matières plastiques Extrusion. TECHNOLOGY & ENGINEERING Chemical & Biochemical. bisacsh Plastics Extrusion fast |
| subject_GND | http://id.loc.gov/authorities/subjects/sh85103166 |
| title | Mixing in single screw extrusion / |
| title_alt | Need for Good Mixing in Single Screw Extrusion -- Examples of Mixing Problems -- Polyethylene Pipes and Cables -- Blow Moulded Bottles -- Chalk Filled Polypropylene Pipe -- Blown Film -- Industrial Blow Mouldings -- Production Scrap Re-use -- Agglomerates and Gels in Thin Extrusions -- Transparent Polycaprolactone/SAN Blends -- Decorative Wood Grain Effects -- References -- Dispersive and Distributive Mixing -- Definitions and Illustrations -- Dispersive Mixing -- Dispersive Mixing Mechanisms -- Dispersive Mixing of Additive Powders Such as Pigments -- Distributive Mixing -- Laminar Shear Flow Mixing -- Measurement of Distributive Mixing Achieved by Laminar Shearing -- Limitations of Lamina Flow Mixing -- Eliminating Laminar Striations -- Measurement of Mixing -- Need for Measurement of Mixing -- Striation Thickness Measurement -- Agglomerate Measurement -- Microscopy Examination of Thin Samples -- Agglomerate Count for Blown Film -- Screen Pack Filtration Test -- Influences of Mixing on Product Properties -- Preparation of Thin Sections for Optical Microscopy Assessment -- Single Screw Extruder Stages: Effects on Mixing -- Pellet Handling: A Source of Variable Composition -- Introduction -- Hopper Design -- Mass Flow Hopper -- Non-mass Flow Hopper -- Round Hoppers -- Square and Rectangular Hoppers -- Ledges and Corners -- Composition Variations -- Example 1 -- Example 2 -- Example 3 -- Other Systems -- Measurement of Particulate Properties -- Hopper Flow Tests. |
| title_auth | Mixing in single screw extrusion / |
| title_exact_search | Mixing in single screw extrusion / |
| title_full | Mixing in single screw extrusion / Martin Gale. |
| title_fullStr | Mixing in single screw extrusion / Martin Gale. |
| title_full_unstemmed | Mixing in single screw extrusion / Martin Gale. |
| title_short | Mixing in single screw extrusion / |
| title_sort | mixing in single screw extrusion |
| topic | Plastics Extrusion. http://id.loc.gov/authorities/subjects/sh85103166 Matières plastiques Extrusion. TECHNOLOGY & ENGINEERING Chemical & Biochemical. bisacsh Plastics Extrusion fast |
| topic_facet | Plastics Extrusion. Matières plastiques Extrusion. TECHNOLOGY & ENGINEERING Chemical & Biochemical. Plastics Extrusion |
| url | https://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=288183 |
| work_keys_str_mv | AT galemartin mixinginsinglescrewextrusion AT rapratechnologylimited mixinginsinglescrewextrusion |