Applications guide for determining the yield strength of in-service pipe by hardness evaluation: final report
This Guide describes a complete process for conducting field hardness testing to estimate the yield strength of pipeline steels. The process is non-destructive so it is suitable for in-situ testing on operating pipelines, at pipe storage facilities, or various other locations. It also allows for pro...
Gespeichert in:
| 1. Verfasser: | |
|---|---|
| Format: | Elektronisch E-Book |
| Sprache: | English |
| Veröffentlicht: |
New York, N.Y.
American Society of Mechanical Engineers
2009
|
| Schriftenreihe: | CRTD (Series)
91 |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Zusammenfassung: | This Guide describes a complete process for conducting field hardness testing to estimate the yield strength of pipeline steels. The process is non-destructive so it is suitable for in-situ testing on operating pipelines, at pipe storage facilities, or various other locations. It also allows for process variations that are suitable for application in different situations and conditions that may be encountered on a pipeline right-of-way and elsewhere. Field hardness testing is not a "one size fits all" methodology where a single hardness testing methodology is suitable for application in all situations that can be encountered |
| Beschreibung: | "This report was prepared by Battelle Memorial Institute--Columbus under contract to the ASME Gas Pipeline Safety Research Committee"--P. iii. - "ASME contract no. OP44297, Battelle project no. N007044"--T.p. verso. - System requirements: Adobe Acrobat Reader. - Mode of access: World Wide Web |
| Beschreibung: | 1 Online-Ressource (vii, 68 Seiten) ill., digital file |
Internformat
MARC
| LEADER | 00000nmm a2200000zcb4500 | ||
|---|---|---|---|
| 001 | BV046643853 | ||
| 003 | DE-604 | ||
| 005 | 20201113 | ||
| 007 | cr|uuu---uuuuu | ||
| 008 | 200327s2009 |||| o||u| ||||||eng d | ||
| 024 | 7 | |a 10.1115/1.802915 |2 doi | |
| 035 | |a (ZDB-240-ASM)1011151802915 | ||
| 035 | |a (OCoLC)1148108623 | ||
| 035 | |a (DE-599)BVBBV046643853 | ||
| 040 | |a DE-604 |b ger |e rda | ||
| 041 | 0 | |a eng | |
| 049 | |a DE-83 | ||
| 084 | |a ZL 4500 |0 (DE-625)159833: |2 rvk | ||
| 100 | 1 | |a Clark, E. B., (Edward B.) |e Verfasser |4 aut | |
| 245 | 1 | 0 | |a Applications guide for determining the yield strength of in-service pipe by hardness evaluation |b final report |c by Edward B. Clark and W.E. Amend ; prepared for American Society of Mechanical Engineers |
| 264 | 1 | |a New York, N.Y. |b American Society of Mechanical Engineers |c 2009 | |
| 300 | |a 1 Online-Ressource (vii, 68 Seiten) |b ill., digital file | ||
| 336 | |b txt |2 rdacontent | ||
| 337 | |b c |2 rdamedia | ||
| 338 | |b cr |2 rdacarrier | ||
| 490 | 0 | |a CRTD (Series) |v 91 | |
| 500 | |a "This report was prepared by Battelle Memorial Institute--Columbus under contract to the ASME Gas Pipeline Safety Research Committee"--P. iii. - "ASME contract no. OP44297, Battelle project no. N007044"--T.p. verso. - System requirements: Adobe Acrobat Reader. - Mode of access: World Wide Web | ||
| 505 | 8 | |a Includes bibliographical references | |
| 505 | 8 | |a 1. Introduction -- 2. Scope -- 3. Hardness testing background -- 4. Field hardness tester types, attributes, application criteria and codes -- 5. Pre-assessment -- 6. Pre-assessment data evaluation -- 7. Hardness tester selection -- 8. Procedure qualification and documentation -- 9. Project staff/test technician qualification requirements -- 10. Pipe sample size and lower bound hardness statistical estimates -- 11. Hardness test locations on pipe lengths -- 12. Pipe surface preparation -- 13. Testing calibration, in-process evaluation, and uncertainty -- 14. Field hardness data evaluations -- 15. Hardness conversion to yield strength -- 16. Hardness conversion validation -- 17. DOT/state special permit (waiver) petition requirements -- References -- Appendix | |
| 520 | |a This Guide describes a complete process for conducting field hardness testing to estimate the yield strength of pipeline steels. The process is non-destructive so it is suitable for in-situ testing on operating pipelines, at pipe storage facilities, or various other locations. It also allows for process variations that are suitable for application in different situations and conditions that may be encountered on a pipeline right-of-way and elsewhere. Field hardness testing is not a "one size fits all" methodology where a single hardness testing methodology is suitable for application in all situations that can be encountered | ||
| 650 | 4 | |a Pipe / Testing / Standards | |
| 650 | 4 | |a Piping / Testing / Standards | |
| 650 | 4 | |a Elastic analysis (Engineering) | |
| 650 | 4 | |a Hardness / Testing | |
| 650 | 4 | |a Nondestructive testing | |
| 650 | 4 | |a Piping / Specifications | |
| 650 | 4 | |a Piping / Design and construction | |
| 650 | 4 | |a Pipelines / Design and construction | |
| 650 | 4 | |a Structural analysis (Engineering) | |
| 650 | 0 | 7 | |a Härteprüfung |0 (DE-588)4022844-7 |2 gnd |9 rswk-swf |
| 650 | 0 | 7 | |a Rohrleitung |0 (DE-588)4050405-0 |2 gnd |9 rswk-swf |
| 650 | 0 | 7 | |a Streckgrenze |0 (DE-588)4183623-6 |2 gnd |9 rswk-swf |
| 653 | |a Electronic books | ||
| 689 | 0 | 0 | |a Rohrleitung |0 (DE-588)4050405-0 |D s |
| 689 | 0 | 1 | |a Streckgrenze |0 (DE-588)4183623-6 |D s |
| 689 | 0 | 2 | |a Härteprüfung |0 (DE-588)4022844-7 |D s |
| 689 | 0 | |5 DE-604 | |
| 700 | 1 | |a Amend, W. E. |e Sonstige |4 oth | |
| 710 | 2 | |a Battelle Memorial Institute |e Sonstige |4 oth | |
| 710 | 2 | |a ASME Gas Pipeline Safety Research Committee |e Sonstige |4 oth | |
| 710 | 2 | |a American Society of Mechanical Engineers |e Sonstige |4 oth | |
| 856 | 4 | 0 | |u https://asmedigitalcollection.asme.org/ebooks/book/75/Applications-Guide-for-Determining-the-Yield |x Verlag |3 Volltext |
| 912 | |a ZDB-240-ASM | ||
| 999 | |a oai:aleph.bib-bvb.de:BVB01-032055174 | ||
Datensatz im Suchindex
| _version_ | 1804181340121202688 |
|---|---|
| adam_txt | |
| any_adam_object | |
| any_adam_object_boolean | |
| author | Clark, E. B., (Edward B.) |
| author_facet | Clark, E. B., (Edward B.) |
| author_role | aut |
| author_sort | Clark, E. B., (Edward B.) |
| author_variant | e b e b c ebeb ebebc |
| building | Verbundindex |
| bvnumber | BV046643853 |
| classification_rvk | ZL 4500 |
| collection | ZDB-240-ASM |
| contents | Includes bibliographical references 1. Introduction -- 2. Scope -- 3. Hardness testing background -- 4. Field hardness tester types, attributes, application criteria and codes -- 5. Pre-assessment -- 6. Pre-assessment data evaluation -- 7. Hardness tester selection -- 8. Procedure qualification and documentation -- 9. Project staff/test technician qualification requirements -- 10. Pipe sample size and lower bound hardness statistical estimates -- 11. Hardness test locations on pipe lengths -- 12. Pipe surface preparation -- 13. Testing calibration, in-process evaluation, and uncertainty -- 14. Field hardness data evaluations -- 15. Hardness conversion to yield strength -- 16. Hardness conversion validation -- 17. DOT/state special permit (waiver) petition requirements -- References -- Appendix |
| ctrlnum | (ZDB-240-ASM)1011151802915 (OCoLC)1148108623 (DE-599)BVBBV046643853 |
| discipline | Maschinenbau / Maschinenwesen |
| discipline_str_mv | Maschinenbau / Maschinenwesen |
| format | Electronic eBook |
| fullrecord | <?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>04064nmm a2200613zcb4500</leader><controlfield tag="001">BV046643853</controlfield><controlfield tag="003">DE-604</controlfield><controlfield tag="005">20201113 </controlfield><controlfield tag="007">cr|uuu---uuuuu</controlfield><controlfield tag="008">200327s2009 |||| o||u| ||||||eng d</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1115/1.802915</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(ZDB-240-ASM)1011151802915</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(OCoLC)1148108623</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)BVBBV046643853</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-604</subfield><subfield code="b">ger</subfield><subfield code="e">rda</subfield></datafield><datafield tag="041" ind1="0" ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="049" ind1=" " ind2=" "><subfield code="a">DE-83</subfield></datafield><datafield tag="084" ind1=" " ind2=" "><subfield code="a">ZL 4500</subfield><subfield code="0">(DE-625)159833:</subfield><subfield code="2">rvk</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Clark, E. B., (Edward B.)</subfield><subfield code="e">Verfasser</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Applications guide for determining the yield strength of in-service pipe by hardness evaluation</subfield><subfield code="b">final report</subfield><subfield code="c">by Edward B. Clark and W.E. Amend ; prepared for American Society of Mechanical Engineers</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="a">New York, N.Y.</subfield><subfield code="b">American Society of Mechanical Engineers</subfield><subfield code="c">2009</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">1 Online-Ressource (vii, 68 Seiten)</subfield><subfield code="b">ill., digital file</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="490" ind1="0" ind2=" "><subfield code="a">CRTD (Series)</subfield><subfield code="v">91</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">"This report was prepared by Battelle Memorial Institute--Columbus under contract to the ASME Gas Pipeline Safety Research Committee"--P. iii. - "ASME contract no. OP44297, Battelle project no. N007044"--T.p. verso. - System requirements: Adobe Acrobat Reader. - Mode of access: World Wide Web</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">Includes bibliographical references</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">1. Introduction -- 2. Scope -- 3. Hardness testing background -- 4. Field hardness tester types, attributes, application criteria and codes -- 5. Pre-assessment -- 6. Pre-assessment data evaluation -- 7. Hardness tester selection -- 8. Procedure qualification and documentation -- 9. Project staff/test technician qualification requirements -- 10. Pipe sample size and lower bound hardness statistical estimates -- 11. Hardness test locations on pipe lengths -- 12. Pipe surface preparation -- 13. Testing calibration, in-process evaluation, and uncertainty -- 14. Field hardness data evaluations -- 15. Hardness conversion to yield strength -- 16. Hardness conversion validation -- 17. DOT/state special permit (waiver) petition requirements -- References -- Appendix</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">This Guide describes a complete process for conducting field hardness testing to estimate the yield strength of pipeline steels. The process is non-destructive so it is suitable for in-situ testing on operating pipelines, at pipe storage facilities, or various other locations. It also allows for process variations that are suitable for application in different situations and conditions that may be encountered on a pipeline right-of-way and elsewhere. Field hardness testing is not a "one size fits all" methodology where a single hardness testing methodology is suitable for application in all situations that can be encountered</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Pipe / Testing / Standards</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Piping / Testing / Standards</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Elastic analysis (Engineering)</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Hardness / Testing</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Nondestructive testing</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Piping / Specifications</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Piping / Design and construction</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Pipelines / Design and construction</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Structural analysis (Engineering)</subfield></datafield><datafield tag="650" ind1="0" ind2="7"><subfield code="a">Härteprüfung</subfield><subfield code="0">(DE-588)4022844-7</subfield><subfield code="2">gnd</subfield><subfield code="9">rswk-swf</subfield></datafield><datafield tag="650" ind1="0" ind2="7"><subfield code="a">Rohrleitung</subfield><subfield code="0">(DE-588)4050405-0</subfield><subfield code="2">gnd</subfield><subfield code="9">rswk-swf</subfield></datafield><datafield tag="650" ind1="0" ind2="7"><subfield code="a">Streckgrenze</subfield><subfield code="0">(DE-588)4183623-6</subfield><subfield code="2">gnd</subfield><subfield code="9">rswk-swf</subfield></datafield><datafield tag="653" ind1=" " ind2=" "><subfield code="a">Electronic books</subfield></datafield><datafield tag="689" ind1="0" ind2="0"><subfield code="a">Rohrleitung</subfield><subfield code="0">(DE-588)4050405-0</subfield><subfield code="D">s</subfield></datafield><datafield tag="689" ind1="0" ind2="1"><subfield code="a">Streckgrenze</subfield><subfield code="0">(DE-588)4183623-6</subfield><subfield code="D">s</subfield></datafield><datafield tag="689" ind1="0" ind2="2"><subfield code="a">Härteprüfung</subfield><subfield code="0">(DE-588)4022844-7</subfield><subfield code="D">s</subfield></datafield><datafield tag="689" ind1="0" ind2=" "><subfield code="5">DE-604</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Amend, W. E.</subfield><subfield code="e">Sonstige</subfield><subfield code="4">oth</subfield></datafield><datafield tag="710" ind1="2" ind2=" "><subfield code="a">Battelle Memorial Institute</subfield><subfield code="e">Sonstige</subfield><subfield code="4">oth</subfield></datafield><datafield tag="710" ind1="2" ind2=" "><subfield code="a">ASME Gas Pipeline Safety Research Committee</subfield><subfield code="e">Sonstige</subfield><subfield code="4">oth</subfield></datafield><datafield tag="710" ind1="2" ind2=" "><subfield code="a">American Society of Mechanical Engineers</subfield><subfield code="e">Sonstige</subfield><subfield code="4">oth</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://asmedigitalcollection.asme.org/ebooks/book/75/Applications-Guide-for-Determining-the-Yield</subfield><subfield code="x">Verlag</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ZDB-240-ASM</subfield></datafield><datafield tag="999" ind1=" " ind2=" "><subfield code="a">oai:aleph.bib-bvb.de:BVB01-032055174</subfield></datafield></record></collection> |
| id | DE-604.BV046643853 |
| illustrated | Illustrated |
| index_date | 2024-07-03T14:14:55Z |
| indexdate | 2024-07-10T08:50:06Z |
| institution | BVB |
| language | English |
| oai_aleph_id | oai:aleph.bib-bvb.de:BVB01-032055174 |
| oclc_num | 1148108623 |
| open_access_boolean | |
| owner | DE-83 |
| owner_facet | DE-83 |
| physical | 1 Online-Ressource (vii, 68 Seiten) ill., digital file |
| psigel | ZDB-240-ASM |
| publishDate | 2009 |
| publishDateSearch | 2009 |
| publishDateSort | 2009 |
| publisher | American Society of Mechanical Engineers |
| record_format | marc |
| series2 | CRTD (Series) |
| spelling | Clark, E. B., (Edward B.) Verfasser aut Applications guide for determining the yield strength of in-service pipe by hardness evaluation final report by Edward B. Clark and W.E. Amend ; prepared for American Society of Mechanical Engineers New York, N.Y. American Society of Mechanical Engineers 2009 1 Online-Ressource (vii, 68 Seiten) ill., digital file txt rdacontent c rdamedia cr rdacarrier CRTD (Series) 91 "This report was prepared by Battelle Memorial Institute--Columbus under contract to the ASME Gas Pipeline Safety Research Committee"--P. iii. - "ASME contract no. OP44297, Battelle project no. N007044"--T.p. verso. - System requirements: Adobe Acrobat Reader. - Mode of access: World Wide Web Includes bibliographical references 1. Introduction -- 2. Scope -- 3. Hardness testing background -- 4. Field hardness tester types, attributes, application criteria and codes -- 5. Pre-assessment -- 6. Pre-assessment data evaluation -- 7. Hardness tester selection -- 8. Procedure qualification and documentation -- 9. Project staff/test technician qualification requirements -- 10. Pipe sample size and lower bound hardness statistical estimates -- 11. Hardness test locations on pipe lengths -- 12. Pipe surface preparation -- 13. Testing calibration, in-process evaluation, and uncertainty -- 14. Field hardness data evaluations -- 15. Hardness conversion to yield strength -- 16. Hardness conversion validation -- 17. DOT/state special permit (waiver) petition requirements -- References -- Appendix This Guide describes a complete process for conducting field hardness testing to estimate the yield strength of pipeline steels. The process is non-destructive so it is suitable for in-situ testing on operating pipelines, at pipe storage facilities, or various other locations. It also allows for process variations that are suitable for application in different situations and conditions that may be encountered on a pipeline right-of-way and elsewhere. Field hardness testing is not a "one size fits all" methodology where a single hardness testing methodology is suitable for application in all situations that can be encountered Pipe / Testing / Standards Piping / Testing / Standards Elastic analysis (Engineering) Hardness / Testing Nondestructive testing Piping / Specifications Piping / Design and construction Pipelines / Design and construction Structural analysis (Engineering) Härteprüfung (DE-588)4022844-7 gnd rswk-swf Rohrleitung (DE-588)4050405-0 gnd rswk-swf Streckgrenze (DE-588)4183623-6 gnd rswk-swf Electronic books Rohrleitung (DE-588)4050405-0 s Streckgrenze (DE-588)4183623-6 s Härteprüfung (DE-588)4022844-7 s DE-604 Amend, W. E. Sonstige oth Battelle Memorial Institute Sonstige oth ASME Gas Pipeline Safety Research Committee Sonstige oth American Society of Mechanical Engineers Sonstige oth https://asmedigitalcollection.asme.org/ebooks/book/75/Applications-Guide-for-Determining-the-Yield Verlag Volltext |
| spellingShingle | Clark, E. B., (Edward B.) Applications guide for determining the yield strength of in-service pipe by hardness evaluation final report Includes bibliographical references 1. Introduction -- 2. Scope -- 3. Hardness testing background -- 4. Field hardness tester types, attributes, application criteria and codes -- 5. Pre-assessment -- 6. Pre-assessment data evaluation -- 7. Hardness tester selection -- 8. Procedure qualification and documentation -- 9. Project staff/test technician qualification requirements -- 10. Pipe sample size and lower bound hardness statistical estimates -- 11. Hardness test locations on pipe lengths -- 12. Pipe surface preparation -- 13. Testing calibration, in-process evaluation, and uncertainty -- 14. Field hardness data evaluations -- 15. Hardness conversion to yield strength -- 16. Hardness conversion validation -- 17. DOT/state special permit (waiver) petition requirements -- References -- Appendix Pipe / Testing / Standards Piping / Testing / Standards Elastic analysis (Engineering) Hardness / Testing Nondestructive testing Piping / Specifications Piping / Design and construction Pipelines / Design and construction Structural analysis (Engineering) Härteprüfung (DE-588)4022844-7 gnd Rohrleitung (DE-588)4050405-0 gnd Streckgrenze (DE-588)4183623-6 gnd |
| subject_GND | (DE-588)4022844-7 (DE-588)4050405-0 (DE-588)4183623-6 |
| title | Applications guide for determining the yield strength of in-service pipe by hardness evaluation final report |
| title_auth | Applications guide for determining the yield strength of in-service pipe by hardness evaluation final report |
| title_exact_search | Applications guide for determining the yield strength of in-service pipe by hardness evaluation final report |
| title_exact_search_txtP | Applications guide for determining the yield strength of in-service pipe by hardness evaluation final report |
| title_full | Applications guide for determining the yield strength of in-service pipe by hardness evaluation final report by Edward B. Clark and W.E. Amend ; prepared for American Society of Mechanical Engineers |
| title_fullStr | Applications guide for determining the yield strength of in-service pipe by hardness evaluation final report by Edward B. Clark and W.E. Amend ; prepared for American Society of Mechanical Engineers |
| title_full_unstemmed | Applications guide for determining the yield strength of in-service pipe by hardness evaluation final report by Edward B. Clark and W.E. Amend ; prepared for American Society of Mechanical Engineers |
| title_short | Applications guide for determining the yield strength of in-service pipe by hardness evaluation |
| title_sort | applications guide for determining the yield strength of in service pipe by hardness evaluation final report |
| title_sub | final report |
| topic | Pipe / Testing / Standards Piping / Testing / Standards Elastic analysis (Engineering) Hardness / Testing Nondestructive testing Piping / Specifications Piping / Design and construction Pipelines / Design and construction Structural analysis (Engineering) Härteprüfung (DE-588)4022844-7 gnd Rohrleitung (DE-588)4050405-0 gnd Streckgrenze (DE-588)4183623-6 gnd |
| topic_facet | Pipe / Testing / Standards Piping / Testing / Standards Elastic analysis (Engineering) Hardness / Testing Nondestructive testing Piping / Specifications Piping / Design and construction Pipelines / Design and construction Structural analysis (Engineering) Härteprüfung Rohrleitung Streckgrenze |
| url | https://asmedigitalcollection.asme.org/ebooks/book/75/Applications-Guide-for-Determining-the-Yield |
| work_keys_str_mv | AT clarkebedwardb applicationsguidefordeterminingtheyieldstrengthofinservicepipebyhardnessevaluationfinalreport AT amendwe applicationsguidefordeterminingtheyieldstrengthofinservicepipebyhardnessevaluationfinalreport AT battellememorialinstitute applicationsguidefordeterminingtheyieldstrengthofinservicepipebyhardnessevaluationfinalreport AT asmegaspipelinesafetyresearchcommittee applicationsguidefordeterminingtheyieldstrengthofinservicepipebyhardnessevaluationfinalreport AT americansocietyofmechanicalengineers applicationsguidefordeterminingtheyieldstrengthofinservicepipebyhardnessevaluationfinalreport |